Sharp MD-M3 Operation Manual - Page 39
Example, To combine two non-contiguous tracks
View all Sharp MD-M3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
(Continued) To combine two non-contiguous tracks: (Example: the first and third tracks) Move the third track to the second track using the MOVE function. Then, combine the first and second tracks using the COMBINE function. Note: q Tracks recorded from analogue inputs cannot be combined with tracks recorded from CDs or MDs using the digital inputs. q Tracks recorded in the stereo mode cannot be combined with tracks recorded in the monaural long-play mode. q Tracks where either track's recording time is less than 15 seconds may not be combined. q This function cannot be used in the random play mode and APMS play mode. s Move (Remote control operation) 4 Select the new track position pressing the or button. q To cancel the operation, press the s button. 5 Press the ENTER button again. q The track is moved, and the unit is stopped at the beginning of the new track which has the same track number as selected number in step 1. Note: q When a track has been moved, the other tracks which are affected will be assigned new track numbers automatically. Example: 2 4 When moving the fifth track to the third track, the old third track will become the new fourth track, and the old fourth track will become the new fifth track. 2 3,5 1 q This function cannot be used in the random play mode and APMS play mode. 1 H 1 Whilst in the stop mode, select the track you want to move pressing the 5 3 or 2 4 button. Or start playing the track to be moved, and then press the 0 6 button. 2 Press the NAME/TOC EDIT button, and within 10 seconds, select "MOVE" pressing the or button. 3 Within 10 seconds, press the ENTER button. 37