Sharp MX-850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 137

4 Paper Select Paper Tray 1. 8½x11 2. 8½x11 Plain Plain 3. 11x17 Plain 4. 8½x14 Plain OK Large Capacity Tray 5. 11x17 Plain 6. 11x17 Plain 7. 11x17 Plain Bypass Tray 8½x11 Plain Check the paper type setting for the bypass tray. If you need to change the setting, touch the paper type key. If you do not need to change the paper size and type that appear under "Bypass Tray", go to step 7. 5 Paper Select Bypass Tray Type/Size Setting Select the paper type. Plain Pre-Printed Recycled Cancel 1 Letter Head 2 Pre-Punched Color Thin Paper Heavy Paper 1 Heavy Paper 2 Heavy Paper 3 Heavy Paper 1: 28+ - 32 lbs.bond (106 - 128 g/m2) Heavy Paper 2: 32+ lbs.bond, -65 lbs.cover (129 - 176 g/m2) Heavy Paper 3: 48 lbs.bond, 110 lbs.index (177 - 205 g/m2) Select the type of paper used in the bypass tray. Select the paper type that you will use. The paper types that can be set vary depending on the bypass tray installed. For paper types that can be set, see "PAPER THAT CAN BE USED IN THE PERIPHERAL DEVICE TRAYS" in the User's Guide and the specifications in the Safety Guide. Paper Select Bypass Tray Type/Size Setting OK Type Recycled Auto-Inch Auto-AB Custom Size Size 12x18(A3W),11x17,8½x14 8½x11,5½x8½R 7¼x10½R,9x12(A4W),A3,A4,B4 A3W(12x18),A3,B4,A4,A5R,B5 B5R,A4W(9x12)11x17,8½x11 A4R X11 Y17 Manual Bypass Tray Type/Size Setting OK Size Input OK 6 X 11 (4~12 5/8) inch Y 17 (5 1/2~18 1/2) inch Set the paper size. [Auto-Inch] key Touch this key when the loaded paper is an inch size (8-1/2" x 11", etc.). When the paper placed in the bypass tray is an inch size, the paper size will be detected automatically and an appropriate size set. [Auto-AB] key Touch this key when the loaded paper is an AB size (A4, etc.). When the paper inserted in the bypass tray is an AB size, the paper size will be detected automatically and an appropriate size set. [Custom Size] key Touch this key when you know the size of the inserted paper but it is not one of the inch or AB sizes. When the [Custom Size] key is touched, the paper size entry screen appears. Touch the [X] key and enter the horizontal dimension of the paper with the keys, and then touch the [Y] key and enter the vertical dimension. When finished, touch the [OK] key. [Manual] key Special standard sizes such as 320mm x 450mm, 225mm x 320mm, 318mm x 469mm, 234mm x 318mm, 312mm x 440mm, 220mm x 312mm, and 16K, 16KR, and 8K (used in China) have been pre-stored. Touch the key of the desired size. (320mm x 450mm, 225mm x 320mm, 318mm x 469mm, 234mm x 318mm, 312mm x 440mm, and 220mm x 312mm can only be used in the bypass tray when a large capacity trays (MX-LCX5) is installed.) 41