Sharp MX-850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 39
Loading tab paper and transparency film, Adjust the paper guide to the tab paper
View all Sharp MX-850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Loading tab paper and transparency film In addition to plain paper, tab paper, transparency film, and other special media can be loaded in tray 5 and tray 6. To load tab paper or transparency film in tray 5 and tray 6 follow the steps below. Loading tab paper To use tab paper, the special guide must be attached as explained below. 1 Take out the tab paper guide. The guide is stored under the cover of the large capacity trays. When finished using tab paper, be sure to replace the guide. Adjust the paper guide to the tab paper position and load tab paper. To adjust the paper guide, see Loading paper and changing the paper size (page 37). Place the tab paper with the print side face up and the tabs to the right. 2 [Example] Make sure that the positions of the tabs correspond with the originals as shown below. Originals Tab paper JKL GHI DEF ABC 1st sheet 2nd sheet 3rd sheet 4th sheet Bottom 1st sheet Top Front side 2nd sheet 3rd sheet 4th sheet Attach the special guide as shown. 3 Gently push the tray in and set the paper type to tab paper. 4 Change the paper type setting to tab paper as explained in "PAPER TRAY SETTINGS" (page 77) in the System Settings. Loading transparency film When loading transparency film, load the film face up in the vertical orientation with the rounded corner at the top right. 39