Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 134

PUNCH FUNCTION If an optional punch module is installed, holes can be punched in output. The [2 Hole Punch] key can be touched in the output screen to selecting two-hole punching. The [3 Hole Punch] key can be touched to select three-hole punching. When the finisher is installed, 5-1/2" x 8-1/2" to 11" x 17" (16 lbs. to 65 lbs. cover) (A5 to A3 (52 g/m2 to 176 g/m2)) paper can be used. However, 12" x 18" (A3W) sized paper and special media such as transparency film and tab paper cannot be used. For detailed information on the sizes and types of paper that can be punched, see the specifications in the Safety Guide. [Examples] [Original 1] [Punch positions] A A B B [Original 2] [Punch positions] AB AB • When the hole punch function is selected, the saddle stitch or paper folding function cannot be used. • Tab paper can be punched manually using the inserter. For more information, see "INSERTER" in the User's Guide. • When the finisher (for the MX-M850) or the saddle stitch finisher is installed, 8-1/2" x 11R" to 11" x 17" (16 lbs. to 90 lbs. index) (B5R to A3 (52 g/m2 to 163 g/m2)) paper can be used. ORIGINAL PLACEMENT ORIENTATION (FOR THE STAPLE SORT AND PUNCH FUNCTIONS) When using the staple sort function or the punch function, the original must be placed as shown below to enable stapling or punching in the desired position on the paper. Staple sort Document feeder tray Document glass Punch Document feeder tray Document glass A B B A A A A A B B B B A B B A A B B A 38