Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 93

OTHER PROBLEMS Problem The touch panel screen is difficult to view. You were logged out without having performed logout yourself. Point to check Is the display contrast properly adjusted? Did Auto Clear activate? You forgot the administrator password. Was the administrator password changed from the factory default setting? Solution Touch the brightness adjustment key ( ) on the system bar in the touch panel to adjust the brightness. ☞ SYSTEM BAR (page 15) When user authentication is used, the currently logged in user will be automatically logged out if Auto Clear activates. (Except when in PC scan mode.) Log in again. If you are the administrator, you can change the time setting of Auto Clear or disable Auto Clear in "Auto Clear Setting". ➞ System Settings (Administrator) > "Operation Settings" > "Other Settings" > "Auto Clear Setting" Contact your dealer or nearest SHARP Service Department. * For the factory default administrator password, see "TO THE ADMINISTRATOR OF THE MACHINE" in the Safety Guide. After changing the password, take special care to remember it. 93