Sharp PG M20X PG-M20X Operation Manual - Page 27
Connecting to Video Equipment, Connecting to, Component Video, Equipment - model
UPC - 074000358355
View all Sharp PG M20X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Setup and Connections Connecting to Video Equipment Connecting to Component Video Equipment Use a 3 RCA to 15-pin D-sub cable and DVI to 15-pin D-sub adaptor when connecting to the INPUT 1 terminal, component video equipment such as DVD players and DTV* decoders. *DTV is the umbrella term used to describe the new digital television system in the United States. 1 Connect the 3 RCA to 15-pin D- sub cable using the DVI to 15pin D-sub adaptor. 2 Use the above cables to con- nect the projector and the video equipment. 3 Connect the projector and the video equipment using an audio cable (commercially available). Note • When connecting the projector to the video equipment in this way, select "Component" for "Signal Type" in the "Picture" menu. See page 40. • A ø3.5 mm stereo minijack to RCA audio cable (commercially available) is recommended for audio input. Optional accessories 3RCA to 15-pin D-sub cable Type: AN-C3CP (9'10" (3.0 m)) DVI to 15-pin D-sub adaptor Model: AN-A1DV (7.9" (20 cm)) To analog component output terminal To audio output terminal DVD player or 3 Audio cable DTV* decoder (commercially available) 2 3 RCA to 15-pin 1 DVI to 15-pin D-sub adaptor D-sub cable (sold separately) (sold separately) -23