Sharp PG M20X PG-M20X Operation Manual - Page 63
Displaying the Break Timer, Displaying and Setting, the Break Timer
UPC - 074000358355
View all Sharp PG M20X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Displaying the Break Timer Displaying and Setting the Break Timer Select "Break Timer" from the "Options (2)" menu ➝ For details, see page 36. 1 When " " is displayed, press or to set the Break Timer. • You can set anywhere between 1 and 60 minutes (in 1 minute units). 2 Press to cancel the Break Timer. Note • Auto Power Off will be temporarily dis- abled during the Break Timer. If no signal transmission occurs for more than 15 minutes after the Break Timer has completed, the projector will turn off. • The Break Timer will be displayed on the startup image. To change the screen displayed during the Break Timer, change the setting of "Startup Image" (see page 57). "On-screen Display Easy to Use Functions -59
Easy to Use Functions
-59
Displaying the Break Timer
"
On-screen Display
Displaying and Setting
the Break Timer
Select “Break Timer” from the “Options
(2)” menu
➝
For details, see page
36
.
1
When
“
”
is displayed, press
or
to set the Break
Timer.
•
You can set anywhere between 1 and
60 minutes (in 1 minute units).
2
Press
to cancel the Break
Timer.
Note
•
Auto Power Off will be temporarily dis-
abled during the Break Timer.
If no signal transmission occurs for more
than 15 minutes after the Break Timer has
completed, the projector will turn off.
•
The Break Timer will be displayed on the
startup image. To change the screen dis-
played during the Break Timer, change
the setting of “Startup Image” (see page
57
).