Sharp PG M20X PG-M20X Operation Manual - Page 76
Resetting the Lamp Timer, Remove the lamp unit., Insert the new lamp unit.
UPC - 074000358355
View all Sharp PG M20X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
4 Remove the lamp unit. • Remove the securing screws from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow. 5 Insert the new lamp unit. • Press the lamp unit firmly into the lamp unit compartment. Fasten the securing screws. 6 Attach the lamp unit cover. • Slide the lamp unit cover in the direction of the arrow. Then tighten the user service screw. Info • If the lamp unit is not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Securing screw Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. 1 Connect the power cord. • Plug the power cord into the AC socket of the projector. 2 Reset the lamp timer. •While pressing simultaneously , , and on the projector, press on the projector. • "LAMP 0000H" is displayed, indicating that the lamp timer is reset. Info • Make sure to reset the lamp timer only when replacing the lamp. Otherwise, this may cause the lamp to become damaged or explode. User service screw AC socket POWER button buttons ENTER button -73 Appendix