Sharp PG M20X PG-M20X Operation Manual - Page 55
Displaying Dual Pictures (Pict in Pict), Displaying the Inset Picture - remote control
UPC - 074000358355
View all Sharp PG M20X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Displaying Dual Pictures (Pict in Pict) Picture in Picture function allows you to display two pictures on the same screen. You can display the image input from INPUT 2 or 3 as an inset picture overlapping the main picture from INPUT 1. (This function can only be set in the RGB menu.) Easy to Use Functions Displaying the Inset Picture Select "Pict in Pict" in the "Options (1)" menu ➝ For displaying, see page 36. 1 Press • Select to select . to clear the Pict in Pict mode. 2 Press or on the remote control or on the projector to switch the image in the inset picture. 3 Press , , or to set the position of the inset picture. • Press to stop the frame from moving or to make the frame disappear. 4 Press to move the inset pic- ture. • The inset picture will be moved to the inset picture frame. Note • The inset picture can only be displayed with composite video (NTSC/PAL/ SECAM) or S-Video signal. • The Freeze function works only with the inset picture, when the Pict in Pict mode is in operation. When the signal entered into INPUT 1 is as follows, Pict in Pict does not work: • With a resolution that overexceeds SXGA. • When the input signal is 480I, 480P, 720P or 1080I. • When the input signal has changed to the Interlace mode using RGB signals. • When the picture display mode is set to "DOT BY DOT". • When no signals are sent to INPUT 1, or when the resolution or refresh rate (vertical frequency) is changed. • Press or on the remote control or on the projector to switch the image in the inset picture. -51