Sharp PN-E603 PN-E603 PN-E703 Operation Manual - Page 11
Connecting Peripheral Equipment, Connection with a PC or AV equipment
View all Sharp PN-E603 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connecting Peripheral Equipment 13 11 12 10 5 3 4 1 8 2 9 67 Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and the other problems. • Do not use any cable that has a damaged or deformed terminal. Using such cables may cause malfunctions. TIPS • Images may not be displayed properly depending on the computer (video card) to be connected. • Use the automatic screen adjustment when a PC screen is displayed for the first time using D-SUB[RGB] or DVI-I (analog), or when the setting of the PC is changed. The screen is adjusted automatically when SELF ADJUST in the MONITOR menu is set to ON. • If the audio output from the playback device is connected directly to speakers or other devices, the video on the monitor may appear delayed from the audio portion. Audio should be played through this monitor by connecting the playback device to the monitor's audio input, and connecting the monitor's audio output to the speakers or other devices. • The audio input terminals used in each input mode are factory-set as follows. Input mode DVI-I DisplayPort HDMI1[PC], HDMI1[AV], HDMI2[PC], HDMI2[AV] D-SUB[RGB], D-SUB[COMPONENT], D-SUB[VIDEO] Audio input terminal (Factory setting) Audio1 input terminal DisplayPort input terminal PC/AV HDMI input terminal Audio2 input terminal Connection with a PC or AV equipment 1. DisplayPort input terminal • Use a commercially available DisplayPort cable. • Select the audio input terminal to be used in DisplayPort of AUDIO SELECT on the SETUP menu. When DisplayPort is selected, connection to the audio input terminal is unnecessary. 2. DVI-I input terminal • Use a commercially available signal cable (DVI-I 29 pin). • Select the audio input terminal to be used in DVI-I of AUDIO SELECT on the SETUP menu. • If the display is not shown properly, set EDID SELECT (DVI-I) of INPUT SELECT on the SETUP menu according to the device to be connected. 3. PC/AV HDMI1 input terminal 4. PC/AV HDMI2 input terminal • Use a commercially available HDMI cable (conforming to the HDMI standard). • Set HDMI1 or HDMI2 of INPUT SELECT on the SETUP menu according to the device to be connected. • Select the audio input terminal to be used in HDMI1[AV], HDMI1[PC], HDMI2[AV] or HDMI2[PC] of AUDIO SELECT on the SETUP menu. When HDMI is selected, connection to the audio input terminal is unnecessary. 5. PC/AV D-sub input terminal • Set D-SUB of INPUT SELECT on the SETUP menu according to the device to be connected. • To use with D-SUB[VIDEO], connect the green terminal to the device's video output. • Select the audio input terminal to be used in D-SUB[RGB], D-SUB[COMPONENT] or D-SUB[VIDEO] of AUDIO SELECT on the SETUP menu. 6. Audio1 input terminal 7. Audio2 input terminal • Use an audio cable without resistance. • Set the audio input terminal to be used in each input mode in AUDIO SELECT on the SETUP menu. 11 E