Sharp PN-E603 PN-E603 PN-E703 Operation Manual - Page 49
■ Network Lan Setup, ■ Network Security, Dns Server Address Auto Acquisition
View all Sharp PN-E603 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Controlling the Monitor with a PC (LAN) ■ NETWORK (LAN SETUP) This screen allows you to set the settings necessary when the monitor is connected to a LAN. ■ NETWORK (SECURITY) This screen allows you to specify the security-related settings. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to OFF, specify an IP address. SUBNET MASK If the DHCP CLIENT is set to OFF, specify the subnet mask. DEFAULT GATEWAY If the DHCP CLIENT is set to OFF, specify the default gateway. If you are not using a default gateway, specify "0.0.0.0". DNS SERVER ADDRESS AUTO ACQUISITION If the DHCP CLIENT is set to ON, specify whether or not to automatically obtain the DNS server address. DNS SERVER Specify the DNS server address if the DHCP CLIENT is SET to OFF or the DNS SERVER ADDRESS AUTO ACQUISITION is set to OFF. If you are not using a DNS server, specify "0.0.0.0". RESET Clicking [Execute] returns all of the LAN SETUP settings to the factory-preset values except for the DNS SERVER ADDRESS AUTO ACQUISITION and DNS SERVER settings. USER NAME / PASSWORD Sets up a user name and password to restrict access to this monitor. After entering a user name and password, click [Apply]. ACCEPT IP ADDRESS You can limit access to this monitor by registering IP addresses of PCs that should have access. To limit access, specify the option "From only specific IP addresses". Otherwise, to allow access from any PC, specify "All IP Addresses". IP ADDRESS 1 to 3 If "ACCEPT IP ADDRESS" is set to "From only specific IP addresses", enter the IP addresses that you want to allow. TIPS • The USER NAME and PASSWORD can be up to 8 alphanumeric characters (hyphens and underscores allowed). • To cancel the user name and/or password after it has been set, make the box empty and click [Apply]. TIPS • When the IP address is set manually, the IP addresses of the monitor connected to the RS-232C output terminal and the daisy chain of connected monitors that follows can be assigned automatically. (See page 25.) 49 E