Sharp R-CD2200M R-CD1200M , R-CD1800 , R-CD-2200M Operation Manual - Page 17
x2/x3
View all Sharp R-CD2200M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Air Filter Cycle Air Filter Cycle can be changed from the factory setting of 100 hours to 001-999 hours * Suppose you want to set the cycle to 250 hours. Procedure Display 8 2 CUSTOM HELP x 2 1 Press the CUSTOM HELP pad twice within 2 seconds and enter 8, 2. After about 1 sec. CHECK SELECT TIME 2 Press the SELECT TIME pad. 2 5 0 3 Enter desired time. (Ex : Enter 2, 5, 0 for 250 hours). START 4 Press the START pad to save settings. STOP CLEAR 5 Press the STOP/CLEAR pad to exit from the Custom Help Function. 9. Selecting Operation in case of Magnetron Failure Your oven has 2 magnetrons. In case of single magnetron failure, the oven can be used until servicing by changing settings to allow operation under single magnetron only. However, check food carefully as additional cooking time will be needed when operating with a single magnetron. CH91 : Your oven does not work when one magnetron fails = Factory setting CH92 : Your oven works even if one magnetron fails. To set magnetron failure options Press the CUSTOM HELP pad twice within 2 seconds then enter the numbers 9, 1 to stop operation when one magnetron fails 9, 2 to allow operation of one magnetron only Press the START pad to save settings and the STOP/ CLEAR pad to exit from the Custom Help Function. 10. Multiplication Factor for Double/Triple Quantity The multiplication factors of the double and triple quantities for memory cooking are preset to 1.80 and 2.60. You can check or change the multiplication factors. * Suppose you want to know the multiplication factor for double quantity with memory 1, and change it to 2.00 in any Memory Input Method. Procedure Display CUSTOM HELP x 2 x2/x3 1 Press the CUSTOM HELP pad twice within 2 seconds and press the DOUBLE/TRIPLE QUANTITY pad. NO. CHECK 0 1 2 Enter memory number. NO. CHECK NO. CHECK After about 1 sec. CHECK SELECT TIME 3 Press the SELECT TIME pad. 2 0 0 4 Enter desired multiplication. (Ex : Enter 2, 0, 0 for 2.00.) START 5 Press the START pad to save settings. NO. CHECK STOP CLEAR 6 Press the STOP/CLEAR pad to exit from the Custom Help Function. EN-16