Sharp T19D1-H Operation Manual - Page 14
Adjusting the screen display
UPC - 074000047792
View all Sharp T19D1-H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Adjusting the screen display For analog signal 1.First perform an automatic adjustment. (p.16) 2.Perform manual adjustment where necessary. (p.17) For digital signal The monitor can generally be used without adjustment. If necessary perform manual adjustment. (p.20) Note: - All adjustments will be saved even after turning the power off. Resetting all adjustment values All adjustment values can be returned to their original ex-factory values in one command. 1. Turn off the monitor power. 2. Press the MENU button and the / MODE button simultaneously, and while doing this press the power button (i.e. turn the power on). Continue to press the buttons until [ALL RESET] appears on the screen. Reset is complete when the displayed message disappears. Adjustment lock function By disabling the control buttons (i.e. setting the lock) any attempted changes to adjusted values will be voided. 1. Turn off the monitor power. 2.While pressing the MENU button, press the power button (i.e. turn the power on). Continue to press the buttons until [ADJUSTMENT LOCKED] appears on the screen. The lock is set when the message is displayed. Note: - When the lock is in place, all buttons other than the power button are disabled. Adjustment lock release 1. Turn off the monitor power. 2.While pressing the MENU button, press the power button (i.e. turn the power on). Continue to press the buttons until [ADJUSTMENT UNLOCKED] appears on the screen. The lock is released when the message is displayed. Notes: - While [ALL RESET] is displayed, the control buttons are disabled. - It is not possible to reset values when the adjustment lock is in place. Remove the adjustment lock before attempting to operate control buttons. Adjusting the backlight 1. Without the OSD Menu being displayed, press the or the button. ADJUSTMENT menu reset Settings of items in the ADJUSTMENT Menu (CLOCK, PHASE, H-POS, V-POS) can be returned to their original ex-factory values. 1. Turn on the monitor power. 2. Press the MENU button and the button simultaneously. When [RESET] appears on the screen, the reset is complete. 2. Adjust by pressing the button (darker) or button (lighter). Note: - On Screen display for adjustment disappears several seconds after the last operation. Note: - It is not possible to reset values when the adjustment lock is in place. Remove the adjustment lock before attempting to operate control buttons. 14