Sharp VL-A111UL Service Manual - Page 8
Disassembly Of The Vcr Main Body
View all Sharp VL-A111UL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
VL-A111U/AH131U VL-AH151U/AH161U 4-2. DISASSEMBLY OF THE VCR MAIN BODY Area A (k) (1) Remove one screw ((k)LX-HZ0063TAFN). VCR lid Frame V (b) (2) Remove five screws ((b)LX-HZ0018TAFF). Tilt frame C VCR lid shaft (i) (2) The jig (example: slotted precision screwdriver) into contact with the removal groove of the VCR lid shaft, and slide the screwdriver with care to prevent damaging the VCR lid and frame V. (3) Turn the tilt frame C so that the screwdriver can be easily inserted, and remove two screws ((i)XiPSN20P04000). (i) VCR lid shaft (3) Pull out the VCR lid shaft head which projects beyond the surface of the VCR lid. (4) Remove one screw ((i)XiPSN20P04000). VCR lid VCR lid knob Cabinet L FPC connector (1) Slide the "VCR lid knob" in the arrow direction, and slide the VCR lid in the arrow direction as far as the cabinet L fastening screw is visible. (Left figure) Since the connector of the microphone is still connected, take care to prevent excessively sliding the VCR lid. (5) Remove the cabinet L partway, and disconnect the FPC connector. 8