Sharp VL-A111UL Service Manual - Page 9
VL-A111U/AH131U, VL-AH151U/AH161U, Caution for installation of the VCR lid
![]() |
View all Sharp VL-A111UL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Caution for installation of the VCR lid VL-A111U/AH131U VL-AH151U/AH161U Microphone connector VCR lid Area B (1) Disconnect the microphone connector. Microphone connector Microphone wire spacer Microphone connector When installing the VCR lid, move the VCR lid in the arrow direction, keeping the VCR lid parallel to the main body as shown above. (b) AV unit FPC (b) Wire fixing tape AV unit wire (2) Remove the connector cable from the hole of the microphone (1) Peel the wire fixing tape. wire spacer. (2) Remove the AV unit wire. (3) Remove the AV unit FPC. (4) Remove two screws ((b)LX-HZ0018TAFF) fixing the AV unit Microphone connector and LCD holder. Tripod angle Frame V Microphone wire spacer (3) Remove the microphone wire spacer from the Frame V. VCR Lid (d) (d) (d) (1) Remove three screws ((d)XiPSF20P04000) and pull out the tripod angle. Pull out (b) (b) (b) (4) Pull out the microphone wire cable with care to prevent it from (2) Remove three screws ((b)LX-HZ0018TAFF) on the tilt frame interfering with the mechanical parts, and remove the VCR V. lid. Move the tilt frame V by a looseness of the tilt FPC. 9
![](/manual_guide/products/sharp-vla111ul-service-manual-dd31434/9.png)