Sharp VN-EZ1U VNEZ1U Operation Manual - Page 22

Preparations Preparations Inserting and Removing the Batteries To supply power to the Digital Recorder, use AA-size batteries (alkaline, nickel cadmium (Ni-Cd) rechargeable or nickel metal hydride rechargeable batteries). See precautions on page 15. Precaution: • Do not use different type batteries together. Inserting batteries 1 Make sure the power of the Digital Recorder is turned off. 2 Slide the battery compartment cover (1) to open it in the direction of the arrow (2). 4 Close the battery compartment cover (1), hold down the cover (2) and slide it in the direction of the arrow (3) until it clicks. 2 1 3 Note: • Press and slide the battery cover until it is closed securely, or the batteries push up the cover. Removing Batteries Take out the batteries in step 3 above. 2 1 3 Load batteries, making sure their plus ( ) and minus ( ) ends are facing as shown below. Maximum Time for Continuous Recording The table below shows the approximate time that battery power can last when the Digital Recorder continuously records a movie at standard temperature (25°C (77°F)). Battery type Continuous recording time AA-size Alkaline batteries (supplied batteries) AA-size nickel metal hydride rechargeable batteries (1450 mAh) 60 min. 100 min. 14