Sharp VN-EZ1U VNEZ1U Operation Manual - Page 25

Preparations Preparations Inserting and Removing a SmartMedia Card This Digital Recorder uses a SmartMedia card for memory. It will retain recorded images even if the batteries are depleted or the power source is interrupted. Inserting a SmartMedia Card 1 Make sure the power of the Digital Recorder is turned off. 2 Slide the battery compartment cover (1) to open it in the direction of the arrow (2). 4 Close the battery compartment cover (1), hold down the cover (2) and slide it in the direction of the arrow (3) until it clicks. 2 1 3 Note: • Press and slide the battery cover until it is closed securely, or the batteries push up the cover. 2 1 3 Insert a SmartMedia card in the direction of the arrow and push it in as far as it will go. • Make sure that the Contact area is facing up and that you insert the end with a chipped corner into the slot. Contact area Removing a SmartMedia card Pull out the SmartMedia card in step 3 above. Notes: • Be careful not to drop the batteries when opening the battery compartment cover. • Do not use a 5 V SmartMedia card. Use the supplied SmartMedia card or a commercially available card, which is 3.3 V type. 17 Chipped corner