Sharp VN-EZ1U VNEZ1U Operation Manual - Page 34

Still Recording You can record still images with operation similar to that of film cameras. Before you start recording, see pages 14 through 20 to prepare your Digital Recorder. Precaution: • Do not try to record images with low battery power. It may cause malfunctions. 1 Slide the POWER switch (1), set the Mode select switch to STILL (2) and then rotate the lens body toward CAMERA (3). 3 POWER 1 MOVIE PLAY STILL CAMERA 2 2 Adjust the angle of the lens body to compose the image on the LCD monitor. STILL mode indicator NORMAL REM 18 Basic Operations 3 Press the Shutter button to record the image. Remaining number NORMAL REM 17 OCT.27.2‰‰‰ 1‰:31 AM Notes: • If the warning indicator "NOT INITIALIZED" appears, format the SmartMedia card by the Digital Recorder (see page 64). • The Digital Recorder automatically chooses the correct shutter speed for the lighting conditions. Note that the slow shutter speed set for the poor lighting may cause small image shakes. And the image on the LCD monitor will be adversely affected. • Using the Digital Recorder under fluorescent lights, mercury lamps or sodium-vapour lamps causes flashs on the recorded images. Sometimes those lightings affect tint of the images. • The Still Recording mode is factory preset to NORMAL. If you want to record still images in higher picture quality, change the mode to FINE (see page 46). Basic Operations OCT.27.2‰‰‰ 1‰:31 AM 26