Sharp VN-EZ1U VNEZ1U Operation Manual - Page 36

5 Composing the image on the LCD monitor, adjust the angle of the lens body. 6 Press the Shutter button to set the timer. • The Timer indicator appears to flash in black and red alternately until the start time is reached. • The Shutter will be released automatically 10 seconds after the Shutter button is pressed. • To cancel the Self-Timer recording, press the MENU button. Timer indicator Notes: • Do not turn off the power or change the mode once the Timer indicator appears. • Whenever the Self-Timer recording finished, the Self-Timer mode returns to "OFF". Turn the Self-Timer "ON" every time you want to record images with it. Basic Operations Remaining Battery Power-Display The Battery power indicator appears on the LCD monitor whenever the power is on. It suggests remaining battery power in 5 levels, as shown below. When the battery power is very low, replace all four batteries with new ones immediately. (green) (green) (yellow) (red) Warns by flashing If the battery is almost dead, the Battery power indicator flashes on the blued LCD monitor screen until the power is turned off five seconds later. Notes: • Use the Battery power indicator only as an indication. • Battery consumption may vary depending on the operating conditions. • The Battery power indicator may not work properly for nickel cadmium (Ni-Cd) rechargeable batteries. Basic Operations 28