Sharp VN-EZ1U VNEZ1U Operation Manual - Page 31

Basic Operations Basic Operations Movie Recording You can record moving subjects with sound. Before you start recording, see pages 14 through 20 to prepare your Digital Recorder. Precaution: • Do not try to record images with low battery power. It may cause malfunctions. 1 Slide the POWER switch (1), set the Mode select switch to MOVIE (2) and then rotate the lens body toward CAMERA (3). 3 POWER 1 PLAY MOVIE STILL CAMERA 2 Note: • If the warning indicator "NOT INITIALIZED" appears, format the SmartMedia card by the Digital Recorder (see page 64). 23 2 Adjust the angle of the lens body to compose the image on the LCD monitor. MOVIE mode indicator NORMAL LAP REM ‰:‰1:15 OCT.27.2‰‰‰ 1‰:31 AM 3 Press the Shutter button to begin recording. Recording time NORMAL LAP 1 REM ‰:‰1:14 Remaning time Notes: • The Digital Recorder automatically chooses the correct shutter speed for the lighting conditions. Note that the slow shutter speed set for the poor lighting may cause small image shakes. And the image on the LCD monitor will be adversely affected. • Using the Digital Recorder under fluorescent lights, mercury lamps or sodium-vapour lamps causes flickers on the recorded images. Sometimes those lightings affect tint of the images. • The Movie Recording mode is factory preset to NORMAL. If you want to record movies in higher picture quality or for a long time, change the resolution setting by selecting one of five modes (see pages 45 and 46).