Sharp VR-1FPN VR1FPN Operation Manual - Page 17

Using the FlashPath [Windows NT 4.0 Operating System] When the FlashPath has not been detected even once: "No FlashPath has been detected in any drive." Under normal conditions: "The FlashPath is functioning normally." When the remaining battery power is low: "Battery low condition detected." When there is no SmartMedia in the FlashPath or the SmartMedia is inserted backwards: "FlashPath error. Check SmartMedia and retry" When the FlashPath has switched to the shutdown mode: "FlashPath has powered off. Eject and re-insert to activate." Error window When a FlashPath error is detected, an error window appears immediately. [Windows 95/98 Operating System] Error window (example) The Stead:Nada earmt axtm,e,ri Please elect the Heel-Path and be sure that the SmartMade has bete/1 trr,..efts,d P, c43e4- ft R0k When the remaining battery power is low: "Battery low condition detected. The SmartMedia is now read only." When there is no SmartMedia in the FlashPath or the SmartMedia is inserted backwards: "The SmartMedia cannot be accessed. Please eject the FlashPath and be sure that the SmartMedia has been inserted properly." When the FlashPath has switched to the shutdown mode: "The FlashPath has powered off to save its batteries. Please eject the FlashPath from your floppy drive and reinsert it to turn it back on." 14