Sharp XL-HF201P User Guide - Page 4
System connections
View all Sharp XL-HF201P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
System connections Make sure to unplug the AC power lead before making any connections. Right speaker FM aerial TV Video cable (not supplied) To video input socket Left speaker Red Wall socket (AC 220 - 240 V ~ 50/60 Hz) ■ Aerial connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received. External FM aerial: Use an external FM aerial (75 ohms coaxial cable) for better reception. When an external FM aerial is used, disconnect the supplied FM aerial wire. Note: Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception. ■ Speaker connection ● For XL-HF201P(S)/(BK) - Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. ● For XL-HF301P(S) - Connect the wire without insulation tube to the minus (-) terminal, and the wire with red insulation tube to the plus (+) Incorrect terminal. ● Connect the wire without insulation tube to the minus (- ) terminal, and the wire with red insulation tube to the plus (+) terminal. ● Use speakers with an impedance of 4 ohms or more, as lower impedance speakers can damage the unit. ● Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit. ● Do not let the bare speaker wires touch each other. ● Do not allow any objects to fall into or to be placed in the bass reflex ducts. ● Do not stand or sit on the speakers. You may be injured. ■ Demonstration mode ● The first time the unit is plugged in, the unit will enter the demonstration mode. ● To cancel the demonstration mode, press the DEMO/ DIMMER button (remote control) during power standby mode. The unit will enter the low power consumption mode. ● If iPod or iPhone is docked, the unit will begin charging. "Charge Mode" will be displayed. Demonstration mode is invalid during charge mode. ● To return to the demonstration mode, press the DEMO/ DIMMER button again. ■ Connecting iPod or iPhone to TV Photo and video files from iPod or iPhone can be viewed by connecting the system to TV/monitor. If the TV/monitor has a video input, connect it to the VIDEO OUT socket at the back of the unit and set the TV Out on the iPod or iPhone unit to "ON" position. Note: Please make sure to set iPod unit to either NTSC or PAL to match your TV signal. Please visit Apple's homepage for further information. ■ AC power connection After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. Note: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. E-4