Sharp XL-HP707 XL-HP707 Operation Manual - Page 11

XL-HP707 ! Antenna connection Supplied FM antenna: Connect the FM antenna wire to the FM 75 OHMS terminal and position the FM antenna wire in the direction where the strongest signal can be received. ! Speaker connection Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. Supplied AM loop antenna: Connect the AM loop antenna to the AM LOOP jack. Position the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, etc., or attach it to a stand or a wall with screws (not supplied). Preparation for Use Note: Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better reception. Installing the AM loop antenna: < Assembling > < Attaching to the wall > Red Black Caution: " Use speakers with an impedance of 6 ohms or more, as lower im- pedance speakers can damage the unit. " Do not mistake the right and the left chan- nels. The right speaker is the one on the right side when you face the unit. " Do not let the bare speaker wires touch each other. " Do not allow any objects to fall into or to be placed in the bass reflex ducts. " Do not stand or sit on the speakers. You may Incorrect be injured. ! Speaker grilles are removable Make sure nothing comes into contact with the speaker diaphragms when you remove the speaker grilles. Wall Screws (not supplied) 11