Sharp XL-HP707 XL-HP707 Operation Manual - Page 17

" Playback will begin from track 1 on disc 1. After that disc finishes playing, the next disc will automatically play. " After the last track on the fifth disc is played, the CD player stops automatically. " When there is no CD in one of the disc trays (1 - 5), the empty tray will be skipped to the next tray with a CD. To exchange other CDs while playing a disc: Press one of the 1 - 5 buttons for the disc not being played and within 5 seconds, press the OPEN/CLOSE button and exchange discs. To remove the CDs: In the stop mode, press the 1 - 5 button and within 5 seconds, press the OPEN/CLOSE button. Caution: " Do not place two CDs in one disc tray. " Do not play discs with special shapes (heart- or octagon-shaped) as it may cause malfunctions. " Do not push the disc tray while it is moving. " If the power fails while the tray is open, wait until the power is restored. " If the disc tray is stopped with force, "ER-CD20" will appear on the display for 3 seconds and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. " If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. " If a disc is damaged, dirty, or loaded upside down, the disc will skip or not play. Auto power on function: When you press any of the following buttons, the unit turns on. " CD button (main unit and remote control): The unit turns on and the "CD" function is activated. " CD / button on the remote control: The unit turns on and CD playback starts (regardless of the last function). " / button on the main unit: The unit turns on and playback of the last function starts (CD/TAPE/TUNER/VIDEO). ! Various CD functions Function Play Main unit Remote control Operation Press in the stop mode. Stop Press in the playback mode. Pause Track up/ Track down Fast forward/Fast reverse Press in the playback mode. Press the / button to resume playback from the paused point. Press in the playback or stop mode. If you press the button in the stop mode, press the / button to start the desired track. Press and hold down in the playback mode. Release the button to resume playback. Notes: " Track up/track down and fast forward/fast reverse are possible only within individual discs. " When the end of the last track is reached during fast forward, " END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. ( : Last track number) CD Playback XL-HP707 17