Sharp XR-1S XR-1S , XR-1X Operation Manual - Page 28
Connecting to Video Equipment
UPC - 074000364103
View all Sharp XR-1S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Connecting to Video Equipment The projector has a COMPUTER/COMPONENT terminal, an S-VIDEO terminal and a VIDEO terminal for video input. See the illustration below to connect with the audio-visual equipment. The image quality is highest in order of the component signal, the S-video signal and the video signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1) on the projector for video connection. When using a 3 RCA (Component) to 15-pin D-sub cable To audio output terminal To component output (Y, CB/PB, CR/PR) terminal To INPUT1 terminal To AUDIO INPUT terminal ø3.5 mm minijack to RCA audio cable (commercially available) 3 RCA (Component) to 15-pin D-sub cable (optional: AN-C3CP) When using an S-video cable To audio output terminal To S-video output terminal To INPUT2 terminal To AUDIO INPUT terminal ø3.5 mm minijack to RCA audio cable (commercially available) S-video cable (commercially available) 24