Sharp XR-1S XR-1S , XR-1X Operation Manual - Page 32
Image Projection Continued
UPC - 074000364103
View all Sharp XR-1S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Image Projection (Continued) 2 Adjusting the Height The height of the projector can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is in a higher position than the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while pressing the HEIGHT ADJUST button. 2 Remove your hands from the HEIGHT ADJUST button of the projector after its height has been finely adjusted. • The angle of projection is adjustable up to 7.5 degrees from the surface on which the projector is placed. 3 Use the rear adjustment foot to make the projector level. • The projector is adjustable ±1 degree from the standard position. HEIGHT ADJUST button Note • When adjusting the height of the projector, trapezoidal distortion occurs. When "Auto Keystone" is set to "On", keystone correction functions automatically to correct trapezoidal distortion. When you want to adjust the automatically corrected image, use the manual keystone correction. (See page 44.) 3 Adjusting the Screen Size You can adjust the screen size using the zoom knob on the projector. Rear adjustment foot Info • Do not apply too much pressure on the projector when the front adjustment foot comes out. • When lowering the projector, be careful not to get your fingers caught in the area between the adjustment foot and the projector. zoom in Zoom Knob zoom out 28