Sharp XR10XL PG-MB56X , PG-MB66X Operation Manual - Page 66

Specifications Product type Projector Model PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L Video system NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/ DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50 Display method Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments DMD panel Panel size: [PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L] 0.55" (14 mm), 1chip XGA DMD [XR-10S-L] 0.55" (14 mm), 1chip SVGA DMD No. of dots: [PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L] 786,432 dots (1,024 [H] × 768 [V]) [XR-10S-L] 480,000 dots (800 [H] × 600 [V]) Lens [PG-MB66X] 1-1.15 × zoom lens, F2.4-2.6, f = 18.7-21.5 mm [PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L] 1-1.15 × zoom lens, F2.4-2.6, f = 19.0-21.9 mm Projection lamp [PG-MB66X/PG-MB56X] 275 W DC lamp (AN-XR20L2) [XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L] 220 W DC lamp (AN-XR10L2) Component input signal 15-pin mini D-sub connector (INPUT1/2) Y: 1.0 Vp-p, sync negative, 75 Ω terminated PB: 0.7 Vp-p, 75 Ω terminated PR: 0.7 Vp-p, 75 Ω terminated Horizontal resolution [PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L] 600 TV lines (DTV720P) [XR-10S-L] 520 TV lines (DTV720P) Computer RGB input 15-pin mini D-sub connector (INPUT 1/2)/output RGB separate/sync on green type analog input: 0-0.7 Vp-p, positive, 75 Ω terminated (OUTPUT) signal HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) VERTICAL SYNC. SIGNAL: Same as above S-video input signal 4-pin mini DIN connector (INPUT 3) Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated Video input signal RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω (INPUT 4) terminated Vertical frequency 45-85 Hz Horizontal frequency 15-70 kHz Pixel clock 12-108 MHz RS-232C terminal 9-pin mini DIN connector Audio input signal ø3.5 mm minijack or RCA terminal: 0.5 Vrms, more than 22 kΩ (stereo) Audio output signal ø3.5 mm minijack: 0.5 Vrms, less than 2.2 kΩ (AUDIO OUTPUT 1-4) Speaker system 4 cm × 2.85 cm oval × 1 Rated voltage AC 100-240 V Input current [PG-MB66X/PG-MB56X] 3.6 A [XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L] 3.0 A Rated frequency 50/60 Hz Power consumption PG-MB66X 350 W ("Bright" mode)/280 W ("Eco + Quiet" mode) with AC 100 V PG-MB56X 330 W ("Bright" mode)/270 W ("Eco + Quiet" mode) with AC 240 V XG-MB50X-L/XR-10X-L 298 W ("Bright" mode)/229 W ("Eco + Quiet" mode) with AC 100 V XR-11XC-L/XR-10S-L 288 W ("Bright" mode)/223 W ("Eco + Quiet" mode) with AC 240 V Power consumption 4.7 W (AC 100 V) - 6.1 W (AC 240 V) (standby) Heat dissipation PG-MB66X 1,315 BTU/hour ("Bright" mode)1,050 BTU/hour ("Eco + Quiet" mode) with AC 100 V PG-MB56X 1,240 BTU/hour ("Bright" mode)/1,010 BTU/hour ("Eco + Quiet" mode) with AC 240 V XG-MB50X-L/XR-10X-L 1,120 BTU/hour ("Bright" mode)/860 BTU/hour ("Eco + Quiet" mode) with AC 100 V XR-11XC-L/XR-10S-L 1,080 BTU/hour ("Bright" mode)/840 BTU/hour ("Eco + Quiet" mode) with AC 240 V Operating temperature 41°F to 95°F (+5°C to +35°C) Storage temperature -4°F to 140°F (-20°C to +60°C) Cabinet Plastic I/R carrier frequency 38 kHz Dimensions (approx.) 12 13/32" × 4 19/64" × 11 1/32" (315 (W) × 109 (H) × 280 (D) mm) (main body only) 12 13/32" × 4 47/64" × 11 37/64" (315 (W) × 120 (H) × 294 (D) mm) (including adjustment foot and projecting parts) Weight (approx.) 8.6 lbs. (3.9 kg) Replacement parts Remote control, Power cord, RGB cable, 3 RCA to 15-pin D-sub cable, DIN-Dsub RS-232C adaptor, Operation manual, Dust filter As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 64