Sharp XV-Z10000 Operation Manual
Sharp XV-Z10000 Manual
 |
View all Sharp XV-Z10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XV-Z10000 manual content summary:
- Sharp XV-Z10000 | Operation Manual - Page 1
PROJECTOR PROJECTEUR PROYECTOR PROJETOR XV-Z10000 OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACION MANUAL DE OPERAÇÃO XV-Z10000 SHARP CORPORATION XV-Z10000#Print#Hyo1,4.p65 1 Printed in Japan Imprimé au Japon Impreso en Japón Impresso no Japão TINS-A440WJZZ 02PXX-JWM 02.10.25, 7:21 PM - Sharp XV-Z10000 | Operation Manual - Page 2
the list of "Supplied accessories" on page 14. Model No.: XV-Z10000 Serial No.: There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full - Sharp XV-Z10000 | Operation Manual - Page 3
: 1-800-BE-SHARP (1-800-237-4277) U.S.A. ONLY WARNING: The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During normal operation, when turning the power off always use the power (OFF) button on the projector or on the remote control. Ensure - Sharp XV-Z10000 | Operation Manual - Page 4
digital projection without any data loss due to analog conversion. This also supports the building of home theaters using HTPC*. * Abbreviation for Home Theater Personal Computer that enables high-definition DVD playback using a personal computer. XV-Z10000#Print#p01_03.p65 3 -3 02.10.25, 7:24 PM - Sharp XV-Z10000 | Operation Manual - Page 5
Brightness Mode 61 Operating the Theater Mode Function 61 Digital Shift Function 62 Adjusting the Digital Shift 62 Subtitle Setting 62 Adjusting the Vertical Size of the Display 62 Video Digital Noise Reduction (DNR) System .... 63 Reducing Image Noise 63 XV-Z10000#Print#p04_05.p65 4 02.10 - Sharp XV-Z10000 | Operation Manual - Page 6
83 Specifications of wired remote control input 83 Function and transmisson codes 83 Sharp remote control signal format 83 Computer Compatibility Chart 84 Troubleshooting 85 For SHARP Assistance (U.S.A only 86 Specifications 87 Dimensions 88 Glossary 89 Index 90 XV-Z10000#Print#p04_05.p65 - Sharp XV-Z10000 | Operation Manual - Page 7
. Never spill liquid of any kind on the product. 17. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. -6 XV-Z10000#Print#p06_14.p65 6 02.10.25, 7:25 PM - Sharp XV-Z10000 | Operation Manual - Page 8
conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls - Sharp XV-Z10000 | Operation Manual - Page 9
your nearest Authorized SharpVision Service Center or Dealer for replacement. See "Replacing the Lamp" on page 76. CAUTION PRECAUCIÓN PRÉCAUTION BQC-XVZ100001 Cautions concerning the setup of the projector I For minimal servicing and to maintain high image qual- ity, SHARP recommends that this - Sharp XV-Z10000 | Operation Manual - Page 10
Manuals of SharpVision Manager PDF operation manuals for the "SharpVision Manager" theater projector software provided are included in the CD-ROM in several languages. To utilize these manuals and follow the instructions on the screen. manual. XV-Z10000#Print#p06_14.p65 9 -9 02.10.25, 7:25 PM - Sharp XV-Z10000 | Operation Manual - Page 11
the projector is in standby. When the power is turned on, this indicator will illuminate blue. 73 Intake vent 25 Adjustment foot 13 Remote control sensor 61 HIGH CONTRAST/ HIGH BRIGHTNESS MODE button For switching between "HIGH CONTRAST MODE" and "HIGH BRIGHTNESS MODE". 73 Air filter/cooling fan - Sharp XV-Z10000 | Operation Manual - Page 12
the connecting cables. Attaching the Terminal Cover 1 Align with the tab on the projector, push the two clips attached on the bottom. 2 Press the tab to attach to the projector. PUSH! 2 2 2 1 1 1 Attach the clips after removing the rubber cap. -11 XV-Z10000#Print#p06_14.p65 11 02.10.25, 7:25 PM - Sharp XV-Z10000 | Operation Manual - Page 13
memory setting. Backlight button For lighting each button, press this button. Remote Control (Top View) Remote control signal transmitters 13 -12 XV-Z10000#Print#p06_14.p65 12 24 WIRED R/C JACK For controlling the projector by connecting the remote control to the projector. 02.10.25, 7:25 PM - Sharp XV-Z10000 | Operation Manual - Page 14
with this projector may exhaust over a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries when they have run out. • Remove the batteries from the remote control if you will not be using the remote control for a long time. XV-Z10000#Print - Sharp XV-Z10000 | Operation Manual - Page 15
AN-C10RS AN-C3CP AN-C3DV Note • Some of the cables may not be available depending on the region. Please check with your nearest Authorized SharpVision Service Center or Dealer. -14 XV-Z10000#Print#p06_14.p65 14 02.10.25, 7:25 PM - Sharp XV-Z10000 | Operation Manual - Page 16
Connections and Setup Connections and Setup XV-Z10000#Print#p15_16.p65 15 02.10.25, 7:25 PM - Sharp XV-Z10000 | Operation Manual - Page 17
Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to: Video the Power Cord Plug in the supplied power cord into the AC socket on the rear of the projector. Supplied accessory Power cord -16 XV-Z10000#Print#p15_16 - Sharp XV-Z10000 | Operation Manual - Page 18
is separated into color and luminance signals to projector and the S-video output terminal on the video equipment. To S-video output terminal To video output terminal VCR or other video equipment Composite video cable (commercially available) S-video cable (commercially available) XV-Z10000 - Sharp XV-Z10000 | Operation Manual - Page 19
on the specifications of the DTV decoder connected to this projector. Please refer to the operation manual of the DTV decoder for details. -18 To analog RGB output terminal DVD player or DTV* decoder 5RCA RGB cable (Commercially available) XV-Z10000#Print#p17_20.p65 18 02.10.25, 7:26 PM - Sharp XV-Z10000 | Operation Manual - Page 20
shown below at this time. Projector DVD player or DTV decoder Y PB PR Y CB CR 3 RCA to 15-pin D-sub cable Type: AN-C3CP (9'10" (3.0 m)) DVI to 15-pin D-sub adaptor Model: AN-A1DV (7.9" (20 cm)) To analog component output terminal DVD player or DTV* decoder XV-Z10000#Print#p17_20.p65 19 02 - Sharp XV-Z10000 | Operation Manual - Page 21
States. DVI cable (sold separately) Connect the projector to the video equipment using the DVI cable. Note • Select the input signal type of the video equipment. See page 64. DVI cable Type:AN-C3DV (9'10'' (3.0m)) DVD player or DTV* decoder -20 XV-Z10000#Print#p17_20.p65 20 02.10.25, 7:26 - Sharp XV-Z10000 | Operation Manual - Page 22
of computer signals com- patible with the projector. Use with com- puter signals other computers. Con- tact your nearest Authorized SharpVision Service Center or Dealer. • Depending on the manual for switching the computer signal output settings. RGB Cable (commercially available) XV-Z10000 - Sharp XV-Z10000 | Operation Manual - Page 23
using the "Plug and Play" function, be sure to turn on the projector first and the connected computer last. Note • The DDC "Plug and Play" function of this projector operates only when used in conjunction with a VESA DDC compatible computer. -22 XV-Z10000#Print#p21_22.p65 22 02.10.25, 7:27 PM - Sharp XV-Z10000 | Operation Manual - Page 24
correctly set up. Refer to the operation manual of the computer for details. • See page 79 for connection of an RS232C cable. Optional RS-232C cable cable Type: AN-C10RS (32'10'' (10.0m)) RS-232C terminal Desktop computer RS-232C cable (sold separately) XV-Z10000#Print#p23_24.p65 23 02.10.25 - Sharp XV-Z10000 | Operation Manual - Page 25
the WIRED R/C JACK on the top of the remote control to the WIRED REMOTE control input terminal. WIRED REMOTE control input terminal To WIRED R/C JACK ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNW-4870CEZZ) -24 XV-Z10000#Print#p23_24.p65 24 02.10.25, 7:27 - Sharp XV-Z10000 | Operation Manual - Page 26
correction. Info • Do not hold the lens when lifting or lowering the projector. • When lowering the projector, be careful not to get your finger caught in the area between the adjustment foot and the projector. Foot releases Adjustment feet XV-Z10000#Print#p25_30.p65 25 02.10.25, 7:28 PM -25 - Sharp XV-Z10000 | Operation Manual - Page 27
desired size using the focus ring or zoom knob on the projector. 1 Zooming is adjusted by mov- ing the zoom knob. 2 The focus is adjusted by rotat- ing the focus ring. Focus ring Zoom knob Zoom in Zoom out Zoom Knob Focus ring -26 XV-Z10000#Print#p25_30.p65 26 02.10.25, 7:28 PM - Sharp XV-Z10000 | Operation Manual - Page 28
Shift The height of the projected image can be adjusted within the shift range of the lens by rotating the lens shift dial on the top of the projector. Note • Do not forcibly turn the lens dial Up Down HIGH CONTRAST/ HIGH BRIGHTNESS MODE button XV-Z10000#Print#p25_30.p65 27 02.10.25, 7:28 PM -27 - Sharp XV-Z10000 | Operation Manual - Page 29
room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when Place the projector so that an imaginary horizontal line that passes through the center of the lens is perpendicular to the screen. -28 XV-Z10000#Print#p25_30. - Sharp XV-Z10000 | Operation Manual - Page 30
an error of ± 3% in the formula above. • Values with a minus (-) sign indicate the distance of the lens center below the bottom of the screen. -29 XV-Z10000#Print#p25_30.p65 29 02.10.25, 8:41 PM - Sharp XV-Z10000 | Operation Manual - Page 31
does not shine into the eyes of the audience. Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. I Before mounting the projector, contact your nearest Authorized SharpVision Service Center or Dealer to obtain the recommended ceiling - Sharp XV-Z10000 | Operation Manual - Page 32
Basic Operation Basic Operation XV-Z10000#Print#p31_39.p65 31 02.10.25, 7:28 PM - Sharp XV-Z10000 | Operation Manual - Page 33
, reset the language according to the procedure on page 34. 1 Plug the power cord into the wall outlet. • The power indicator illuminates red, and the projector enters standby mode. 2 Press on the remote control or on the projector. • The power indicator illuminates blue. After the lamp replacement - Sharp XV-Z10000 | Operation Manual - Page 34
remote control or on the projector to select the INPUT mode. • After pressing once on the projector, use to select the desired input mode. Note • When no signal is received, "NO SIGNAL" will be displayed. When a signal that the projector XV-Z10000#Print#p31_39.p65 33 02.10.25, 7:29 PM -33 - Sharp XV-Z10000 | Operation Manual - Page 35
can cause damage due to the rise in internal temperature, as the cooling fan also stops. • When connected to equipment such as an amplifier, be sure to turn off the power to the equipment connected first and then to the projector. Selecting the On-screen Display Language • The on-screen display - Sharp XV-Z10000 | Operation Manual - Page 36
3 Press ' or " to select the de- sired language, and then press . 4 Press . • The desired language will be set as the on-screen display. Basic Operation XV-Z10000#Print#p31_39.p65 35 02.10.25, 7:29 PM -35 - Sharp XV-Z10000 | Operation Manual - Page 37
the diagram at right each time it is pressed. 2 Press ', ", \ and | to adjust the Keystone correction. • If you want to make more detailed corrections, press to display the test jagged while adjusting the image. Compresses lower side. Test pattern -36 XV-Z10000#Print#p31_39.p65 36 02.10.25, 7:29 - Sharp XV-Z10000 | Operation Manual - Page 38
the aspect ratio using the vertical size adjustment. Pressing ' increases the vertical length of the image. Press to reset the image. UNDO button Pressing " decreases the vertical length of the image. Press to reset the image. Basic Operation XV-Z10000#Print#p31_39.p65 37 02.10.25, 7:29 PM - Sharp XV-Z10000 | Operation Manual - Page 39
can be set in the projector. I INPUT 1 / 2 / 5 Mode Main menu Picture Page 44 Sub menu Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp -30 +30 CLR Temp 5500 11500 Reset White Emphasis [ON/OFF] Gamma Position Color Selected Progressive Mode Picture Setting Standard - Sharp XV-Z10000 | Operation Manual - Page 40
+30 Hue -30 +30 Reset (This Color) Reset (All Colors) View Settings Standard Custom 1 Custom 3 [R] Red [Y] Yellow [G] Green [C] Cyan [B] Blue [M] Magenta Main menu Options Page 62 Language Page 34 Sub menu Digital Shift -30 +30 Subtitle -30 +30 Reset DNR Lamp Timer OSD Display Video System - Sharp XV-Z10000 | Operation Manual - Page 41
of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following procedure. Menu "Menu Screen MENU button MENU button ', ", \, | buttons -40 XV-Z10000#Print#p40_56.p65 40 02.10.25, 7:30 PM - Sharp XV-Z10000 | Operation Manual - Page 42
following item ("Bright" after "Contrast") will be displayed. | • Press or to return to the previous screen. 4 Press \ or | to adjust the item selected. • The adjustment is stored. 5 Press . • The menu screen will disappear. XV-Z10000#Print#p40_56.p65 41 02.10.25, 7:30 PM -41 Basic Operation - Sharp XV-Z10000 | Operation Manual - Page 43
or INPUT 5 RGB mode is selected. 2 Press \ or | to select the menu you want to adjust. Note • For details on the menus, see the tree charts on pages 38 and 39. 3 Press button M Menu screen MENU button MENU button ', ", \, | buttons Sub menu -42 XV-Z10000#Print#p40_56.p65 42 02.10.25, 7:30 PM - Sharp XV-Z10000 | Operation Manual - Page 44
set. Note • Some adjustment items will display a confirmation message. When setting an item, press \ or | to select "Yes" or "OK" and then press . • Use to select "ON" or "OFF" for the item of "Eonomy Mode". 7 Press . • The menu will disappear. Sub menu Basic Operation XV-Z10000#Print#p40_56.p65 - Sharp XV-Z10000 | Operation Manual - Page 45
of input signal. • The picture adjustments can be stored separately in each input mode. • Some parameters may not be able to be adjusted depending on the combination of INPUT mode and "Signal Type". • To reset all adjustment items, select "Reset" and press . -44 XV-Z10000#Print#p40_56.p65 44 02 - Sharp XV-Z10000 | Operation Manual - Page 46
This function allows you to select the desired color reproduction mode. Select "Color Selected" in the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. ➝For setting the color reproduction mode, see page 50. XV-Z10000#Print#p40_56.p65 45 02.10.25, 7:30 PM - Sharp XV-Z10000 | Operation Manual - Page 47
source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with NTSC and PAL60Hz or at Mode, when the film source has been entered. -46 XV-Z10000#Print#p40_56.p65 46 02.10.25, 7:30 PM - Sharp XV-Z10000 | Operation Manual - Page 48
"INPUT # Memory" each time button is pressed. I When Changing Saved Contents: Change the contents of the "Picture" menu after selecting the Memory number for which adjustment values are to be changed. XV-Z10000#Print#p40_56.p65 47 PICTURE SETTING button 02.10.25, 7:30 PM -47 Basic Operation - Sharp XV-Z10000 | Operation Manual - Page 49
. Allows you to adjust the gamma curve for each of RGB. Allows you to adjust gamma value using SharpVision Manager Software. Note refer to the SharpVison Manager operation manual (supplied). Standard Black Detail Brighten SVM Gamma Custom 2 Custom 1 -48 XV-Z10000#Print#p40_56.p65 48 02. - Sharp XV-Z10000 | Operation Manual - Page 50
For more contrast in blue color For less brightness in red color For more brightness in red color For less brightness in green color For more brightness in green color For less brightness in blue color For more brightness in blue color Basic Operation XV-Z10000#Print#p40_56.p65 49 02.10.25 - Sharp XV-Z10000 | Operation Manual - Page 51
" is selected for "Color Selected", other items (e.g., Target) cannot be adjusted. Selecting the Target Color Select "Target" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Red Yellow Green Cyan Blue Magenta -50 XV-Z10000#Print#p40_56.p65 50 - Sharp XV-Z10000 | Operation Manual - Page 52
"C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Setting the Hue of the Target Color Select "Hue" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. XV-Z10000#Print#p40_56.p65 51 02.10.25, 7:30 PM -51 - Sharp XV-Z10000 | Operation Manual - Page 53
" and "Hue" of the color selected for "Target" are reset. "Lightness", "Chroma" and "Hue" of all colors are reset. Overview of All Color Settings Select "View Settings" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. -52 XV-Z10000#Print#p40_56.p65 52 - Sharp XV-Z10000 | Operation Manual - Page 54
55 for details. Saving Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Select "Save Setting" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. XV-Z10000#Print#p40_56.p65 53 02 - Sharp XV-Z10000 | Operation Manual - Page 55
not be displayed. • When selecting a stored adjustment setting with "Select Setting", you can set the projector in the stored adjustments. Special Mode Settings Ordinarily, the type of for information on the currently selected input signal. -54 XV-Z10000#Print#p40_56.p65 54 02.10.25, 7:30 PM - Sharp XV-Z10000 | Operation Manual - Page 56
, see pages 40 to 43. Note When setting to " Normal" or " High Speed": • Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, when connected to a computer. Manual adjustments should be performed: • When the optimum image cannot be achieved with Auto Sync - Sharp XV-Z10000 | Operation Manual - Page 57
. ➝For operating the menu screen, see pages 40 to 43. Selected item Description The image set as a background image is projected. The computer image being adjusted is displayed. -56 XV-Z10000#Print#p40_56.p65 56 02.10.25, 7:30 PM - Sharp XV-Z10000 | Operation Manual - Page 58
Easy to Use Functions Easy to Use Functions XV-Z10000#Print#p57_61.p65 57 02.10.25, 7:31 PM - Sharp XV-Z10000 | Operation Manual - Page 59
enlarged. • To return to the standard image, press while "RESIZE" is displayed on the screen. RESIZE button Screen display of the picture display mode -58 XV-Z10000#Print#p57_61.p65 58 02.10.25, 7:31 PM - Sharp XV-Z10000 | Operation Manual - Page 60
4:3 aspect ratio * 480I 480P 576I 576P NTSC PAL SECAM Letter box image With squeeze 540P 1080I For 16:9 aspect ratio 720P * * * * * Easy to Use Functions XV-Z10000#Print#p57_61.p65 59 02.10.25, 7:31 PM -59 - Sharp XV-Z10000 | Operation Manual - Page 61
ן600) XGA For 4:3 aspect ratio (1024 ן768) SXGA For 5:4 aspect ratio (1280 ן1024) DOT BY DOT 800 ן600 1024 ן720 1280 ן720 1280 ן720 -60 XV-Z10000#Print#p57_61.p65 60 02.10.25, 7:31 PM - Sharp XV-Z10000 | Operation Manual - Page 62
"HIGH CONTRAST MODE", the fan noise increases. • Even when selecting "HIGH CONTRAST MODE", the fan noise may increase if internal temperature rises enough to activate the cooling function. HIGH CONTRAST/ HIGH BRIGHTNESS MODE button Easy to Use Functions XV-Z10000#Print#p57_61.p65 61 02 - Sharp XV-Z10000 | Operation Manual - Page 63
to describe the new digital television system in the United States. Adjusting the Digital Shift Select adjusted more effectively with the Digital Shift function. • The subtitle setting can be made only with the SMART STRETCH and CINEMA ZOOM screen. For details, see pages 59 and 60. -62 XV-Z10000 - Sharp XV-Z10000 | Operation Manual - Page 64
OFF" in the following cases: • When the image is blurry. • When the contours and colors of moving images drag. • When TV broadcasts with weak signals are projected. Info • This function and warning displays (Power off/Temp./Change The Lamp., etc.)) -63 XV-Z10000#Print#p62_65.p65 63 02.10.25, 7:32 PM - Sharp XV-Z10000 | Operation Manual - Page 65
video equipment. A. RGB Set when analog RGB signals are received. A. Comp. Set when analog component signals are received. For INPUT 1 and INPUT 2 For INPUT 5 -64 XV-Z10000#Print#p62_65.p65 64 02.10.25, 7:32 PM - Sharp XV-Z10000 | Operation Manual - Page 66
equipment. When connected to SECAM video equipment. When reproducing NTSC signals in PAL video equipment. When connected to NTSC video equipment. Easy to Use Functions XV-Z10000#Print#p62_65.p65 65 02.10.25, 7:32 PM -65 - Sharp XV-Z10000 | Operation Manual - Page 67
function allows you to select the image displayed when no signal is being sent to the projector. Selecting a Background Image Select "Background" in the "Options" menu on the menu screen , the screen will be displayed with the interference. -66 XV-Z10000#Print#p66_68.p65 66 02.10.25, 7:32 PM - Sharp XV-Z10000 | Operation Manual - Page 68
the power consumption of the projector. Easy to Use Functions Setting the Power Save Select "Power Save" SharpVision Manager Software. • "RS-232S Port" is switched on and off by pressing . XV-Z10000#Print#p66_68.p65 67 Status ON (Low power mode) OFF (Standard mode) Brightness 80% 100% Power - Sharp XV-Z10000 | Operation Manual - Page 69
"Auto Power Off" is switched on and off by pressing . Selecting the Transmission Speed (RS-232C) This menu allows you to adjust the projector and computer are set for the same baud rate. Refer to the computer's operation manual for instructions for setting the computer's baud rate. -68 XV-Z10000 - Sharp XV-Z10000 | Operation Manual - Page 70
Reversing/Inverting Projected Images This projector is equipped with a reverse/invert image function that is used for the reversed image and ceiling-mount setups. See page 30 for these setups. Front Ceiling+Front Rear Ceiling+Rear Easy to Use Functions XV-Z10000#Print#p69_70.p65 69 02.10.25, - Sharp XV-Z10000 | Operation Manual - Page 71
This function can be used to display all the adjusted settings as a list on the screen. Overview of All Menu Settings Select the "Status" menu on the menu screen and press . ➝For operating the menu screen, see pages 40 to 43. -70 XV-Z10000#Print#p69_70.p65 70 02.10.25, 7:33 PM - Sharp XV-Z10000 | Operation Manual - Page 72
Appendix Appendix XV-Z10000#Print#p71_84.p65 71 02.10.25, 7:34 PM - Sharp XV-Z10000 | Operation Manual - Page 73
diluted with water, wring the cloth well and then wipe the projector. Strong cleaning detergents may discolor, warp or damage the coating on the projector. Make sure to test on a small, inconspicuous area on the projector before using. -72 XV-Z10000#Print#p71_84.p65 72 02.10.25, 7:34 PM - Sharp XV-Z10000 | Operation Manual - Page 74
until the cooling fan stops. Side and Rear view Bottom view Ventilative holes Power (OFF) button Ventilative holes Power (OFF) button 2 Unplug the Power Cord. Appendix 3 Clean the dust off by putting the cleaner hose on the intake ventilative holes. Cleaner hose Cleaner hose XV-Z10000#Print - Sharp XV-Z10000 | Operation Manual - Page 75
is abnormally high. The lamp does not illuminate. Problem Possible Solution • Blocked air intake • Relocate the projector to an area with proper ventilation. • Cooling fan break- • Take the projector to your nearest down Authorized SharpVision Service • Internal circuit failure Center - Sharp XV-Z10000 | Operation Manual - Page 76
projector operation, be sure to first press . Make sure the power has turned off and the cooling fan has stopped, then clean the vents. • Do not unplug the power cord after the power has been turned off and while the cooling fan is running. The cooling fan runs for about 90 seconds. Appendix XV - Sharp XV-Z10000 | Operation Manual - Page 77
from your nearest Authorized SharpVision Service Center or Dealer. Then carefully change the lamp by following the instructions described in this section. If you wish, you may have the lamp replaced at your nearest Authorized SharpVision Service Center or Dealer. -76 XV-Z10000#Print#p71_84.p65 76 - Sharp XV-Z10000 | Operation Manual - Page 78
the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). Lamp unit BQC-XVZ100001 Appendix 3 Remove the lamp unit cover. • Loosen the user service screw that secures the lamp unit cover. Then open the cover in the direction of the arrow. XV-Z10000#Print - Sharp XV-Z10000 | Operation Manual - Page 79
the user service screw. Info • If the lamp unit and lamp cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. 1 Connect the power cord. • Plug the power cord into - Sharp XV-Z10000 | Operation Manual - Page 80
10 Not connected C1 11 Not connected C2 12 Not connected C3 13 Not connected C4 14 +5V power C5 15 Ground • DVI Analog Component Input Signal Pin No. Signal Pin No. Signal Hot plug Connected to internal circuit Not connected Appendix XV-Z10000#Print#p71_84.p65 79 02.10.25, 7:34 PM -79 - Sharp XV-Z10000 | Operation Manual - Page 81
code (0DH) Command 4-digit Response code format Normal response Parameter 4-digit Problem response (communication error or incorrect command) O K Return code (0DH BRIGHT" of INPUT 1 image adjustment is set to -10. Computer RABR _ - 1 0 → ← Projector OK -80 XV-Z10000#Print#p71_84.p65 80 02. - Sharp XV-Z10000 | Operation Manual - Page 82
(-30 - +30) R C B R _ * * * OK OR ERR INPUT 5 COLOR (-30 - +30) R C C O _ * * * OK OR ERR PICTURE XV-Z10000#Print#p71_84.p65 81 GAMMA PICTURE CONTROL CONTENTS COMMAND PARAMETER RETURN INPUT 5 TINT (-30 - +30) R C T I _ * * * OK OR ERR INPUT 5 SHARP (-30 - +30) R C S H _ * * * OK OR ERR - Sharp XV-Z10000 | Operation Manual - Page 83
ERR RESET (THIS COLOR) C M R E _ _ _ 1 OK OR ERR RESET (ALL COLORS) I A R E _ _ _ 0 OK OR ERR RGB ADJUSTMENT RESET I A R E _ _ _ 1 OK OR ERR SAVE POWER OFF : NO USE A P O W _ _ _ 0 OK OR ERR AUTO POWER OFF : USE A P O W _ _ _ 1 OK OR ERR LAMP XV-Z10000#Print#p71_84.p65 82 02.10.25, 7:35 PM - Sharp XV-Z10000 | Operation Manual - Page 84
bits, with "10" indicating "Front" and "01" indicating "Rear". Sharp remote control signal format Transmission format: 15-bit format D D D D D 1 0 1 1 0 0 1 1 1 1 1 1 1 0 1 D to D Common Data Bit Reverse in D -83 XV-Z10000#Print#p71_84.p65 83 02.10.25, 7:35 PM Appendix - Sharp XV-Z10000 | Operation Manual - Page 85
Details on how to change display modes can be found in your notebook computer's operation manual. • When this projector receives 640 × 350 VESA format VGA signals, "640 × 400" appears on the (Hz) 60 60 50 50 60 50 60 50 DVI Support ✔ -84 XV-Z10000#Print#p71_84.p65 84 02.10.25, 7:35 PM - Sharp XV-Z10000 | Operation Manual - Page 86
Troubleshooting Problem No picture and no sound or projector does not start. Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to rear panel of the projector. • - Sharp XV-Z10000 | Operation Manual - Page 87
"Troubleshooting" section on this page. If this operation manual does not answer your question, please call toll free 1-877-DTV-SHARP (1-877-388-7427) for further assistance. Or, send us an e-mail at [email protected] . Our World Wide Web address is http://www.sharpusa.com/ . -86 XV-Z10000 - Sharp XV-Z10000 | Operation Manual - Page 88
Terminal cover, Lens cap (attached), SharpVision Manager Software CD-ROM, Projector operation manual, SharpVision Manager operation manual Replacement parts Lamp unit (Lamp/cage module) (BQC-XVZ100001), Remote control (RRMCGA128WJSA), AA size batteries , Power cord (CACCDA010DE01), Terminal cover - Sharp XV-Z10000 | Operation Manual - Page 89
Dimensions Units: inches (mm) Side View Rear View Top View Side View 15 49/50 (406) 7 (178) Front View Bottom View 18 11/16 (475) -88 XV-Z10000#Print#p85_92.p65 88 02.10.25, 7:35 PM - Sharp XV-Z10000 | Operation Manual - Page 90
. CLR Temp (Color temperature) Function that can be used to adjust the color temperature to suit the type of image input to the projector. Decrease the color temperature to create warmer to display it fully on a 16:9 screen. Appendix XV-Z10000#Print#p85_92.p65 89 02.10.25, 7:35 PM -89 - Sharp XV-Z10000 | Operation Manual - Page 91
NORMAL 58 Optional accessories 14 OSD Display 63 PDF 9 Phase 53 Power buttons 32 Power cord 16 Power indicator 32 PRJ mode 69 Progressive Mode 46 Remote control 12 Remote control sensor 13 Replacing the lamp 76 RESIZE button 58 Reversing/Inverting Projected Images 69 RS-232C terminal - Sharp XV-Z10000 | Operation Manual - Page 92
Coverage (if any): Where to Obtain Service: What to do to Obtain Service: XV-Z10000 Projector (Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from date of purchase except for the Projector Lamp for which the warranty period is ninety - Sharp XV-Z10000 | Operation Manual - Page 93
(bulb 90 days) To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact: SHARP ELECTRONICS OF CANADA LTD. SHARP ELECTRONICS OF CANADA LTD 335 Britannia Road East Mississauga, Ontario L4Z 1W9 (905) 568-7140 Web site: www.sharp.ca -92 XV-Z10000#Print
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
 |
 |
SHARP CORPORATION
Printed in Japan
Imprimé au Japon
Impreso en Japón
Impresso no Japão
TINS-A440WJZZ
02PXX-JWM
XV-Z10000
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃO
XV
-
Z10000
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
ENGLISH
.............
-1 –
-XX
FRANÇAIS
...........
-1 –
-XX
ESPAÑOL
............
-1 –
-XX
PORTUGUÊS
......
-1 –
-XX
XV-Z10000#Print#Hyo1,4.p65
02.10.25, 7:21 PM
1