Sharp XV-Z10000 Operation Manual - Page 31
Projection from behind the screen, Projection using a mirror, Ceiling-mount setup
View all Sharp XV-Z10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Setup Projecting a Reversed/Inverted Image Projection from behind the screen I Place a translucent screen between the projector and the audience. I Reverse the image by setting "Rear" for "PRJ Mode" in the "Options" menu. See page 69 for use of this function. When using the default setting. MOn-screen Display Projection using a mirror I Place a mirror (normal flat type) in front of the lens. I Reverse the image by setting "Rear" for "PRJ Mode" in the "Options" menu, when the mirror is placed on the audience side. See page 69 for use of this function. The image is reversed. When using the default setting. MOn-screen Display Info • When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience. Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. I Before mounting the projector, contact your nearest Authorized SharpVision Service Center or Dealer to obtain the recommended ceiling-mount bracket (sold separately). (ANCM250 ceiling-mount bracket, AN-EP101B extension tube for AN-CM250.) I Be sure to adjust the position of the projector to match the distance (Z) from the lens center position (see page 29) to the lower edge of the image, when mounting the projector on the ceiling. I Invert the image by setting "Ceiling + Front" for "PRJ Mode" in the "Options" menu. See page 69 for use of this function. The image is reversed. When using the default setting. MOn-screen Display The image is inverted. -30 XV-Z10000#Print#p25_30.p65 30 02.10.25, 7:28 PM