Sharp XV-Z10000 Operation Manual - Page 12
Projector Rear View - remote
View all Sharp XV-Z10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Introduction Projector (Rear View) INPUT 1 terminals 18 Terminals for component and RGB signals. INPUT 5 terminal 19 Terminal for DVI digital, computer RGB, and COMPONENT signals. INPUT 2 terminals 18 Terminals for component and RGB signals. AC socket 16 17 INPUT 3 terminal Terminal for connecting video equipment with an S-video terminal. 23 RS-232C terminal For controlling projector using a computer. DC 12V OUTPUT terminal 24 WIRED REMOTE control input terminal 17 INPUT 4 terminal For connecting video equipment. Intake vent 73 Kensington Security Standard connector Exhaust vent 73 73 Intake vent Remote control 13 sensor Using the Kensington Lock This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector. Using the Terminal Cover When the projector is used on a desktop, high mounted or ceiling mounted, attach the terminal cover (supplied) to hide the connecting cables. Attaching the Terminal Cover 1 Align with the tab on the projector, push the two clips attached on the bottom. 2 Press the tab to attach to the projector. PUSH! 2 2 2 1 1 1 Attach the clips after removing the rubber cap. -11 XV-Z10000#Print#p06_14.p65 11 02.10.25, 7:25 PM