Sharp XV-Z9000U XVZ9000U Operation Manual - Page 16
Operating the Remote Control, Using as a Wired Remote Control
UPC - 074000358126
View all Sharp XV-Z9000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Setup & Connections Operating the Remote Control Remote Control 23Ј (7 m) 30˚ 45˚ 30˚ The remote control can be used to control the projector within the range shown on the left. • The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the signal may differ due to the screen material. 45˚ 30˚ Remote Control Using the remote control in a dark room The backlights of the operation buttons can be turned on for five seconds and off by pressing BACKLIGHT. If you want to turn off the backlights while they are on, press BACKLIGHT again. BACKLIGHT button Using as a Wired Remote Control 3.5 mm stereo minijack cable (commercially available) When the remote control cannot be used due to the range or positioning of the projector (rear projection, etc.), connect a 3.5 mm stereo minijack cable (commercially available) from the wired remote control jack on the top of the remote control to the Wired remote control jack on the back of the projector. E-16