Sharp XV-Z9000U XV-Z9000U Operation Manual - Page 58

Specifications Product type Projector Model XV-Z9000U Video system PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43 DTV 480i/480P/720P/1080i Display method DLP chip, RGB optical shutter method DLP panel Panel size: 0.8Љ Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments Drive method: Digital Light Processing (DLP™) No. of dots: 921,600 dots (1,280 [H] ‫ ן‬720 [V]) Lens 1-1.35‫ ן‬zoom lens, F3.0, f=32.5-44.0 mm Projection lamp 275 W NSH lamp Contrast ratio 1100:1 Video input signal RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75 Ω terminated S-video input signal 4-pin Mini DIN connector (INPUT 3) Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated Component input signal RCA Connector (INPUT 1, 2) Y: 1.0 Vp-p, sync negative, 75 Ω terminated PB: 0.7 Vp-p, 75 Ω terminated PR: 0.7 Vp-p, 75 Ω terminated Horizontal resolution 520 TV lines (NTSC 3.58 input), 750 TV lines (DTV 720P input) RGB input signal 15-PIN MINI D-SUB CONNECTOR (INPUT 5): RGB separate/composite sync/sync on green type analog input: 0-0.7 Vp-p, positive, 75 Ω terminated HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) or composite sync (Apple only) VERTICAL SYNC. SIGNAL: Same as above Pixel clock 12-120 MHz Vertical frequency 43-100 Hz Horizontal frequency 15-81 kHz Computer control signal 9-pin D-sub connector (RS-232C Port) Rated voltage AC 100-240 V Input current 3.8 A Rated frequency 50/60 Hz Power consumption 365 W (SELECTING "BRIGHT" in the "Theater Mode") 310 W (SELECTING "NORMAL" in the "Theater Mode") Power dissipation 1,400 BTU/hour Operating temperature 41°F to 95°F (‫ם‬5°C to ‫ם‬35°C) Storage temperature ‫מ‬4°F to 140°F (‫מ‬20°C to ‫ם‬60°C) Cabinet Plastic I/R carrier frequency 38 kHz Dimensions (approx.) 1811⁄16Љ (W) ‫ ן‬7Љ (H) ‫ ן‬1549⁄50Љ (D) (475 ‫ ן‬178 ‫ ן‬406 mm) (main body only) 1811⁄16Љ (W) ‫ ן‬7Љ (H) ‫ ן‬191⁄2Љ (D) (475 ‫ ן‬178 ‫ ן‬496 mm) (including terminal cover) Weight (approx.) 20.9 lbs. (9.5 kg) (main body only) Supplied accessories Remote control, Two AA size batteries, Power cord (11Ј 10Љ, 3.6 m), Terminal cover, Lens cap (attached), CD-ROM, Projector operation manual, SharpVision Manager operation manual Replacement parts Lamp unit (Lamp/cage module) (BQC-XVZ9000/1), Remote control (RRMCG1657CESA), AA size batteries, Power cord (CACCU5013DE01), Terminal cover (CCOVA1985CE01), Lens cap (PCAPH1056CESA), CD-ROM (UDSKA0047CEN1), Projector operation manual (TINS-7416CEZZ), SharpVision Manager operation manual (TINS-7418CEZZ) This SHARP projector uses a DMD chip. This very sophisticated chip contains 921,600 pixels. As with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to. This unit has some inactive pixels within acceptable tolerances which may result in inactive dots on the picture screen. This will not affect the picture quality or the life expectancy of the unit. If you have any questions about this matter, please call toll free 1-877-DTV-SHARP (1-877-388-7427). U.S.A. ONLY Specifications are subject to change without notice. Appendix E-58