Snapper 500Z Operater's Manual - Page 17
Foot Pedal Adjustment, Mowing Height Adjustment
View all Snapper 500Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Operation Mowing Height Adjustment The cutting height adjustment pin (A, Figure 6) controls the mower cutting height. The cutting height is adjustable between 1-1/2" (3,37 cm) and 4-1/2" (11,47 cm) in 1/4" (0,64 cm) increments. B 1. Depress the deck lift foot pedal (B) until it locks into the 4-1/2" (11,47 cm) position. 2. Place the cutting height adjustment pin in the desired cutting height. 3. S/N: 2014509321 & Below: Depress the deck lift foot pedal then push the lock lever (C) toward the right to release the lock. S/N: 2014509322 & Above: Depress the deck lift foot pedal then pull the lock lever (C) towards the rear of the machine. 4. Release the deck lift foot pedal until it comes to rest against the cutting height adjustment pin. S/N: 2014509321 & Below: C A S/N: 2014509322 & Above: A C B Not fodruction Figure 6. Mowing Height Adjustment oA. Cutting Height Adjustment Pin r B. Deck Lift Foot Pedal Rep C. Deck Lift Lock lever Foot Pedal Adjustment The deck lift foot pedal can be adjusted to accommodate the A B C operator's height for optimal comfort. To adjust pedal position: 1. Remove the foot pedal (A, Figure 7) from the pedal mount tab (B). D 2. Remove the pedal mount hardware (C) and rotate the tab 180 degrees. 3. Reinstall the pedal mount hardware and tighten securely. 4. Reinstall the foot pedal on the pedal mount tab in the proper orientation as shown in Figure 7. Figure 7. Foot Pedal Adjustment A. Deck Lift Foot Pedal B. Pedal Mount Tab C. Pedal Mount Hardware D. Optional Position 15