Sony Ericsson Z600 User Guide - Page 17
Battery, Use only the Sony Ericsson-specified Z600 - charger
View all Sony Ericsson Z600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Battery Use only the Sony Ericsson-specified Z600 battery and charger. When supplied, your battery will not be fully charged. Both the status bar within the battery icon in the display and the charging indicator (red) show the charging status. Charging (5 °C-45 °C) is complete when appears. Full charging can take up to approximately 3 hours, but may vary depending on certain conditions (for example, if your phone is switched on or if temperature is outside the operating range). When your battery is completely empty, it can take some time until the battery icon appears during charging. As an energy-saving measure disconnect the charger from both the mains socket and the phone after charging. On exposure to high temperatures your battery may expand slightly. This has no influence on your safety/health and will reduce to its original size once re-exposed to a lower temperature. Getting started Inserting the Battery 1 Slide the battery cover down to remove. 2 Align the claws on the battery terminal with those of the phone and press battery down. 3 Align the claws at the side of the cover with slots of the phone and slide back into place until the lock clicks. 2 1 This is the Internet version of the user's guide. © Print only for private use. 17