Sony AVD-K600P HTV600DP Operating Instructions (main amp/tuner for HTV) - Page 18
VIDEO Operation Setup Continued, Using the VIDEO Setup Menu, Channel Selection
![]() |
View all Sony AVD-K600P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
VIDEO Operation Setup (Continued) Using the VIDEO Setup Menu 1 Press SETUP/MENU and the MAIN menu will appear. 2 Use V/v to select the SETUP menu, then press ENTER. The SETUP menu will appear. Channel Selection This DVD/VCR Receiver is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Preparation: Connect the DVD/VCR Receiver to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD/VCR Receiver on page 11. 3 Use V/v to select a desired option on the SETUP menu. Then use B/b to select a desired setting. FUNCTION OSD The on-screen display of this DVD/VCR Receiver can be turned on or off. FUNCTION OSD can be switched between ON and OFF using B/b. LANGUAGE SELECT The on-screen programming of this DVD/VCR Receiver can be displayed in either English, Spanish, or French. LANGUAGE SELECT can be switched between ENGLISH, SPANISH and FRENCH using B/b. AUDIO MODE The DVD/VCR Receiver has two separate audio playback systems, the high quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a DVD/VCR Receiver that does not have VHS Hi-Fi. AUDIO MODE can be switched between HI-FI and NORMAL using B/b. BROADCAST TYPE (STEREO/SAP/MONO) Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the DVD/VCR Receiver automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO position. The DVD/VCR Receiver will then record a STEREO program when available, and record a mono program IF the program is NOT IN STEREO. For weak STEREO and/or SAP broadcasts, changing the display to mono may give clearer sound. BROADCAST TYPE can be switched between STEREO, SAP, and MONO using B/b. AUDIO OUTPUT (STEREO/LEFT/RIGHT) Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and ANTENNA OUT. This display setting should normally be left in the stereo position, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels. AUDIO OUTPUT can be switched between STEREO, LEFT, and RIGHT using B/b. 4 Press SETUP/MENU to return to the TV screen. 18 AUTO CHANNEL PROGRAMMING 1 Press SETUP/MENU and the MAIN menu will appear. 2 Use V/v to select the TUNING menu, then press ENTER. The TUNING menu will appear. 3 Use v to select the SOURCE SELECT option, then use B/b to select TUNER. Press B/b repeatedly to switch between TUNER, LINE1(L1) and LINE2(L2). 4 Use V/v to select the AUTO CHANNEL SET option, then use B/b to search for channels. The tuner will automatically cycle through all available channels in the area and place them in the tuner's memory. 5 After the AUTO CHANNEL SET PROCEEDING is complete, make sure the TUNING BAND is set appropriately (TV or CATV) using V/v and choosing the correct TUNING BAND (TV or CATV) by using B/b while in the TUNING menu. Remember, TV is for the air antenna reception, CATV is for cable or wireless cable connection. 6 Press SETUP/MENU to return to the TV screen. 7 Use CH/PRESET(+/-) on the front panel or remote control to cycle the DVD/VCR Receiver through the channels in memory. Note Channel Selection will not be activated during playback. TO ADD OR ERASE CHANNELS FROM MEMORY This feature allows you to add or erase channels in memory manually. 1 Use v to select the CH. ADD/DEL option on the TUNING menu. Use B/b to select a channel to add or erase. 2 Use ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels. 3 Press SETUP/MENU to return to the TV screen.
![](/manual_guide/products/sony-avdk600p-htv600dp-operating-instructions-main-amptuner-htv-8cdda4d/18.png)