Sony AVD-K600P HTV600DP Operating Instructions (main amp/tuner for HTV) - Page 37

OPERATION Speaker Setup You can set your personal preferences on the DVD function mode. Adjust the following settings for the built-in 5.1 channel surround decoder. Disc Audio Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language Progressive Scan 5.1 Speaker Setup Others R R Front L Volume Size Distance Test Return 0 dB Small 1 ft 1 Press SETUP/MENU. The Setup menu appears. 2 Select "5.1 Speaker Setup" using the V/v buttons on the setup menu. 3 While "5.1 Speaker Setup" is selected, press b button. 4 Press b buttons to select the desired speaker. 5 Adjust options by using V/v/B/b buttons. Distance If you connected speakers to your DVD/VCR Receiver, setting the Distance lets the speakers (except subwoofer) know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. (1 - 20 ft, 1 ft = 0.30 m) Note You can not set the distance of subwoofer speaker. Test Press ENTER to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system. Front Left (L) → Center → Front Right (R) → Rear Right (R) → Rear Left (L) → Subwoofer You can stop the test using V/v. Return Press ENTER to return to the previous menu. Speaker selection Select a speaker that you want to adjust. ((Front speaker (Left), Front speaker (Right), Center Speaker, Rear speaker (Left), Rear speaker (Right), or Subwoofer)) Note Certain speaker settings are prohibited by the Dolby Digital licensing agreement. Volume Press B / b to adjust the output level of the selected speaker. (-6dB ~ 6dB) Size Since the speaker settings are fixed, you cannot change the settings. Subwoofer's size is fixed "Large" and the other speaker's size are fixed "small". 37