Sony AVD-K600P HTV600DP Operating Instructions (main amp/tuner for HTV) - Page 42

Troubleshooting (Continued) Symptom Some channels are skipped over when using CH/PRESET(+/-). Picture and sound of broadcasting channel are weak or missing. Cause Those channels were deleted with the CH. ADD/DEL option. Antenna or cables are loose. Wrong CHANNEL SOURCE option is being used. Camcorder image is not shown. Camcorder image via A/V input to DVD/VCR Receiver is not shown on TV screen. Timer recording is not possible. Stereo Audio Record and/or Playback is not present. Camcorder is off. DVD/VCR Receiver INPUT SELECT is not set to LINE1(L1) or LINE2(L2). Clock in DVD/VCR Receiver is not set to correct time. Timer has been programmed incorrectly. TIMER indicator light does not appear after programming timer. TV is not Stereo-compatible. Broadcast program is not in stereo format. DVD/VCR Receiver A/V Out jacks are not connected to TV A/V In jacks. DVD/VCR Receiver Audio/Video Out is not selected for viewing at the TV. DVD/VCR Receiver BROADCAST TYPE mode is set to SAP or MONO. Correction Use CH. ADD/DEL option on the TUNING menu to restore channels. See "Channel Selection" on page 18. Tighten connections or replace cable. Try all CHANNEL SOURCE options. See "Channel Selection" on page 18 for details. Turn camcorder on and operate properly. Use INPUT SELECT to select LINE input channel (LINE1(L1) or LINE2(L2)). Set clock to correct time. See "Setting the Clock" on page 19. Reprogram Timer. See "Timer Recording" on pages 25 and 26. Reprogram Timer and turn DVD/VCR Receiver off to enable timer. No action is possible. No action is possible. Make A/V connections. Stereo is available only via A/V output from DVD/VCR Receiver. Select A/V source as TV input. Set BROADCAST TYPE mode to STEREO. See "Using the VIDEO Setup Menu" on page 18. 42