Sony AVD-K600P HTV600DP Operating Instructions (main amp/tuner for HTV) - Page 41

Troubleshooting

Get Sony AVD-K600P - Amp/tuner For Htv600dp System PDF manuals and user guides View all Sony AVD-K600P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

REFERENCE Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power. Cause The power cord is disconnected. The power is on, but the DVD/VCR Receiver does not work. No picture. No disc is inserted. No tape is inserted. The TV is not set to receive DVD/VCR Receiver signal output. TV/VIDEO mode for DVD/VCR Receiver is set to TV MODE. No sound. The playback picture is poor. The DVD/VCR Receiver does not start playback. The video cable is not connected securely. The connected TV power is turned off. The equipment connected with the audio cable is not set to receive DVD/VCR Receiver signal output. The audio cables are not connected securely. The power of the equipment connected with the audio cable is turned off. The audio connecting cord is damaged. The disc is dirty. Tape heads are dirty. Tape is a rental or was recorded on another VCR. No disc is inserted. No tape is inserted. An unplayable disc is inserted. The disc is placed upside down. The disc is not placed within the guide. The disc is dirty. The Rating level is set. Correction Plug the power cord into the wall outlet securely. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) Select the appropriate video input mode on the TV so the picture from the DVD/VCR Receiver appears on the TV screen. Press the TV/VIDEO button on the remote control repeatedly to select VIDEO mode. VCR MODE appears in the display window. Connect the video cable securely. Turn on the TV. Select the correct input mode on the audio receiver so you can listen to the sound from the DVD/VCR Receiver. Connect the audio cable securely. Turn on the equipment connected with the audio cable. Replace it with new one. Clean the disc. Clean video heads. Use CH/PRESET(+/-) for manual tracking adjustment while tape is playing. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) Insert a playable disc. (Check the disc type, color system, and Regional code.) Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide. Clean the disc. Cancel the Rating function or change the rating level. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
REFERENCE
41
Symptom
No power.
The power is on, but the
DVD/VCR Receiver
does not work.
No picture.
No sound.
The playback picture is
poor.
The DVD/VCR Receiver
does not start playback.
Cause
z
The power cord is disconnected.
z
No disc is inserted.
z
No tape is inserted.
z
The TV is not set to receive DVD/VCR
Receiver signal output.
z
TV/VIDEO mode for DVD/VCR Receiver
is set to TV MODE.
z
The video cable is not connected
securely.
z
The connected TV power is turned off.
z
The equipment connected with the
audio cable is not set to receive
DVD/VCR Receiver signal output.
z
The audio cables are not connected
securely.
z
The power of the equipment connected
with the audio cable is turned off.
z
The audio connecting cord is damaged.
z
The disc is dirty.
z
Tape heads are dirty.
z
Tape is a rental or was recorded on
another VCR.
z
No disc is inserted.
z
No tape is inserted.
z
An unplayable disc is inserted.
z
The disc is placed upside down.
z
The disc is not placed within the guide.
z
The disc is dirty.
z
The Rating level is set.
Correction
z
Plug the power cord into the wall outlet
securely.
z
Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
z
Select the appropriate video input mode
on the TV so the picture from the
DVD/VCR Receiver appears on the TV
screen.
z
Press the TV/VIDEO button on the
remote control repeatedly to select
VIDEO mode. VCR MODE appears in
the display window.
z
Connect the video cable securely.
z
Turn on the TV.
z
Select the correct input mode on the
audio receiver so you can listen to the
sound from the DVD/VCR Receiver.
z
Connect the audio cable securely.
z
Turn on the equipment connected with
the audio cable.
z
Replace it with new one.
z
Clean the disc.
z
Clean video heads.
z
Use
CH/PRESET(+/–)
for manual track-
ing adjustment while tape is playing.
z
Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
z
Insert a playable disc. (Check the disc
type, color system, and Regional code.)
z
Place the disc with the playback side down.
z
Place the disc on the disc tray correctly
inside the guide.
z
Clean the disc.
z
Cancel the Rating function or change
the rating
level.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.