Sony BDV-N8100W Operating Instructions - Page 54
Changing the preset, code of the remote, control Preset mode, Resetting the remote, control
View all Sony BDV-N8100W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Button m/M ./> N PLAY X PAUSE x STOP MUTING VOL +/- CH +/- SLEEP (INPUT) Remote's mode TV STB z z z a z z z z z z z z z z z z z z Note • In TV or STB mode, if you press any of the buttons above, the TV or STB button lights up. (However, depending on the code setting, some buttons may not work, and the TV or STB button may not light up.) • Depending on the TV or equipment you may not be able to use some of the buttons. Changing the preset code of the remote control (Preset mode) You can control non-Sony equipment by changing the preset code of the remote control. 1 Press HOME. The home menu appears on the TV screen. 2 Press B/b to select [Setup]. 3 Press V/v to select [Remote Control Setting Guide], then press . 4 Press V/v to select [Preset Mode], then press . 5 Press V/v to select the equipment type that you want to operate with the supplied remote control, then press . 6 Press V/v to select the device's manufacturer, then press . 7 Press POP UP/MENU while pressing TV (for a TV) or STB (for a cable box, digital satellite receiver, digital video recorder, etc.). 8 When the TV or STB button starts flashing, enter the code on the TV screen using the number buttons, then press ENTER. If you successfully set the code, the TV or STB button will flash twice slowly. If the setting is unsuccessful, the TV or STB button will flash five times quickly. Note • You can exit Preset mode by pressing the TV or STB button (whichever button is flashing). • If you do not operate the remote control for more than 10 seconds during presetting mode, the remote control exits from presetting mode. Resetting the remote control 1 While holding down AV ?/1, hold down VOL -, then press CH -. The BD, TV, and STB buttons light up. 2 Release all buttons. The BD, TV, and STB buttons turn off and the preset code is cleared. The remote control returns to its default settings. 54US