Sony CCD-FX435 Primary User Manual - Page 33

Editing onto Another Tape You can create your own video program by editing with any other 8 mm, Hi8, ME VHS, 5-VHS, ffiEgB VHSC, SESIB S-VHSC, M Betamax or Er P- 1 ED Betamax VCR that has audio/video inputs. Before Editing Conned the camcorder to the VCR using the AN connecting cable (CCD-FX530: supplied, CCD-FX1130/FX435/FX630: not supplied). (p. 16) Set the input selector on the VCR to LINE, if available. (1) Set the POWER switch to PLAYER. (2) Set EDIT to ON in the menu system (p. 32). o2 a NEW o *(;) EDO ap EWE ENNUI ENO 1 t POWER tiltri -li go0FF LA 15upip3 / saupos spoiN ay3 atigiue 0 O 0 r -N%, : Signal flow If your VCR is a monaural type, connect only the white plug for audio on both the camcorder and VCR. Starting Editing (1) Insert a blank tape (or a tape you want to record over) into the VCR, insert your recorded tape into the camcorder. (2) Play back the recorded tape on the camcorder until you locate the point where you want to start editing, then set the camcorder in the Playback pause mode. (3) On the VCR, locate the recording start point and set the VCR in the recording pause mode. (4) Press on the camcorder and VCR simultaneously to start editing. To Edit More Scenes Repeat steps 2 to 4. To Stop Editing Press C on both the camcorder and the VCR. Use of the EDITSEARCH button You can play back the tape in normal/reverse direction by holding down EDITSEARCH during Playback pause mode. You can also play back still pictures successively at specific intervals by pressing EDITSEARCH intermittently. Note on the DISPLAY function If you have displayed the viewfinder screen indicators on the TV, erase the indicators by pressing DISPLAY on the Remote Commander so that they will not be superimposed on the edited tape. 33