Sony CDP-C445 Operating Instructions - Page 25

Cha ter 5 Additional InformatiOn Maintenance Specifications Cleaning Your Player Clean the cabinet, panel and controls: with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. Cleaning Discs When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for analog discs. Compact Disc Player System Laser Wavelength Frequency response Signal to noise ratio Dynamic range Harmonic distortion Channel separation Compact disc digital audio system Semiconductor laser 780-790 nm 2 Hz-20 kHz (±0.5 dB) More than 107 dB More than 98 dB Less than 0.0035% More than 100 dB Outputs LINE OUT (phono jacks) DIGITAL OUT (OPTICAL) (optical output connector) PHONES (stereo phone jack) Output level 2 V Load impedance over 10 kilohms Wave length 660 nm Output level -18 dBm Output level max. 10 mW Load impedance 32 ohms General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Model for the USA and Canada 120 V AC, 60 Hz Model for Australia 240V AC, 50/60 Hz 14 W 430 x 125 x 385 mm (w/h/d) (17 x 5 x 15'/4 inches) Including projecting parts and controls 5.7 kg , net (12 lbs 10oz) Remote Commander RM-D335 Remote control system Infrared control Power requirements 3 V DC with two size AA batteries (IEC designation R6) Dimensions 45 x 20 x 185 mm (w/h/d) (113/16 x 13/16 x 73/8 inches) Mass 100 g (3.5 oz) including batteries Design and specifications are subject to change without notice. 25