Sony CDX-4480ESP Operating Instructions - Page 10

If you cannot tune in a preset station Push the SEEK/AMS control up or down momentarily to search for the station (Automatic Tuning). Scanning stops when the unit receives a station. Push the SEEK/AMS control up or down repeatedly until the desired station is received. Note If the automatic tuning stops too frequently, press (SHIFT), then press (3) (PLAY MODE) repeatedly until "LOCAL" (local seek mode) is displayed. Then press (4) (n) to select "ON." Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, push the SEEK/AMS control up or down and hold until the desired frequency appears (manual tuning). EN If FM stereo reception is poor - Monaural Mode 1 Press (SHIFT), then press (3) (PLAY MODE) repeatedly until "MONO" appears. 2 Press (4) (n) repeatedly until "MONO-ON" appears. The sound improves, but becomes monaural ("ST" disappears). 3 Press (SHIFT). To go back to the normal mode, select "MONO-OFF" in step 2 above. Changing the displayed items Each time you press (DSPL), the item changes as follows: z Frequency z Clock MOTION DISPLAY* Z * All the items above are scrolled in the display one by one in order. Storing the station names - Station Memo You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can store up to eight characters for a station. Storing the station names 1 Tune in a station whose name you want to store. 2 Press (LIST) for two seconds. FM1 3 Enter the characters. 1 Rotate the dial clockwise to select the desired characters. (A n B n C n ··· Z n 0 n 1 n 2 n ··· 9 n + n - n * n / n \ n > n < n . n _ ) FM1 If you rotate the dial counterclockwise, the characters appear in the reverse order. If you want to put a blank space between characters, select "_" (underbar). 2 Press (4) (n) after locating the desired character. The flashing cursor moves to the next space. FM1 If you press (1) (N), the flashing cursor moves to the left. 3 Repeat steps 1 and 2 to enter the entire name. 4 To return to the normal radio reception, press (LIST) for two seconds. Tip To erase/correct a name, enter "_" (under-bar) for each character. 10