Sony CDX-4480ESP Operating Instructions - Page 11
Other Functions
View all Sony CDX-4480ESP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Displaying the station name Press (DSPL) during radio reception. FM1 Each time you press (DSPL), the item changes as follows: z Station name*1 z Frequency MOTION DISPLAY*2 Z Clock Z *1 If the station name of a station is not stored, "NO NAME" appears in the display for one second. *2 All the items above are scrolled in the display one by one in order. Erasing the station name 1 Tune in any station and press (LIST) for two seconds. 2 Press (DSPL) for two seconds. 3 Rotate the dial to select the name that you want to erase. 4 Press (5) (ENTER) for two seconds. The name is erased. Repeat steps 3 and 4 if you want to erase other names. 5 Press (LIST) for two seconds. The unit returns to the normal radio reception mode. Locating a station by name - List-up 1 Press (LIST) momentarily. The name assigned to the station currently playing appears in the display. L1 ENTER 2 Press (LIST) repeatedly until you find the desired station. 3 Press (5) (ENTER) to tune in the desired station. Note Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. To turn off the display, press (DSPL). Other Functions You can connect an optional rotary commander (RM-X4S) with this unit. Using the rotary commander The rotary commander works by pressing buttons and/or rotating controls. By pressing the button (the SOURCE and MODE buttons) (SOURCE) EN (MODE) Radio/Other Functions Every time you press (SOURCE), the source changes as follows: Tuner ˜ CD Pressing (MODE) changes the operation in the following ways: Tuner : FM1 n FM2 n AM Tip When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander. continue to next page n 11