Sony CDX-4480ESP Operating Instructions - Page 13

Changing the sound and, display settings

Page 13 highlights

Changing the sound and display settings You can set: •CLOCK (page 7). •D.INFO (dual information) to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF). •BEEP to turn the beep tones on or off. •RM (Rotary Commander) to change the operative direction of the controls of the optional rotary commander. - Select "NORM" to use the rotary commander in the factory preset position. - Select "REV" when you mount the rotary commander on the right of the steering column. Note If you connect an optional power amplifier and do not use the built-in amplifier, the beep tone will be disabled. 1 Press (SHIFT). 2 Press (2) (SET UP) repeatedly until the desired setting mode appears. Each time you press (2) (SET UP), the item changes as follows: CLOCK n D.INFO* n BEEP n RM * When you have not tune the station or there is no CD being played, these items will not appear. Note The displayed item will differ depending on the source. 3 Press (4) (n) to select the desired setting (for example: ON or OFF). 4 Press (SHIFT). When the mode setting is complete, the normal playback mode appears. Boosting bass sound - D-bass You can enjoy clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even if the vocal sound is the same volume. You can emphasize and adjust the bass sound easily with the D-BASS dial. This effect is similar to the one you get when you use an optional subwoofer system. Moreover, the Digital D-bass* function creates even sharper and more powerful bass sound than Analog D-bass. * Digital D-bass is available during CD playback. Digital D-BASS Analog D-BASS Level Level D-BASS 3 D-BASS 2 D-BASS 1 D-BASS 3 D-BASS 2 D-BASS 1 Other Functions 0dB 0dB Frequency (Hz) Frequency (Hz) EN Adjusting the bass curve Turn the D-BASS dial to adjust the bass level (1, 2 or 3). "D-BASS" appears in the display. During CD playback, "DIGITAL D-BASS" appears in the display. To cancel, turn the dial to the OFF position. Note If the bass sound becomes distorted, adjust the DBASS dial or volume control. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

13
EN
Changing the sound and
display settings
You can set:
•CLOCK (page 7).
•D.INFO (dual information) to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•BEEP to turn the beep tones on or off.
•RM (Rotary Commander) to change the
operative direction of the controls of the
optional rotary commander.
Select “NORM” to use the rotary
commander in the factory preset
position.
Select “REV” when you mount the
rotary commander on the right of the
steering column.
Note
If you connect an optional power amplifier and do
not use the built-in amplifier, the beep tone will
be disabled.
1
Press
(SHIFT)
.
2
Press
(2)
(SET UP) repeatedly until the
desired setting mode appears.
Each time you press
(2)
(SET UP), the item
changes as follows:
CLOCK
n
D.INFO
*
n
BEEP
n
RM
*
When you have not tune the station or there
is no CD being played, these items will not
appear.
Note
The displayed item will differ depending on
the source.
3
Press
(4)
(
n
) to select the desired
setting (for example: ON or OFF).
4
Press
(SHIFT)
.
When the mode setting is complete, the
normal playback mode appears.
Boosting bass sound
— D-bass
You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-BASS dial. This effect is similar to
the one you get when you use an optional
subwoofer system.
Moreover, the Digital D-bass
*
function creates
even sharper and more powerful bass sound
than Analog D-bass.
*
Digital D-bass is available during CD playback.
Adjusting the bass curve
Turn the D-BASS dial to adjust the bass
level (1, 2 or 3).
“D-BASS” appears in the display.
During CD playback, “DIGITAL D-BASS”
appears in the display.
To cancel, turn the dial to the OFF position.
Note
If the bass sound becomes distorted, adjust the D-
BASS dial or volume control.
Digital D-BASS
0dB
D-BASS 3
D-BASS 2
D-BASS 1
0dB
D-BASS 3
D-BASS 2
D-BASS 1
Level
Analog D-BASS
Level
Frequency (Hz)
Frequency (Hz)
Other Functions