Sony CDX-4480ESP Operating Instructions - Page 12

By rotating the control (the SEEK/ AMS control) Changing the operative direction The operative direction of controls is factoryset as in the illustration below. To increase Rotate the control momentarily and release it to: •Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback. •Tune in the stations automatically. Rotate and hold the control to tune in the specific station. By pressing in and rotating the control (the PRESET control) EN Push in and rotate the control to: Receive the stations memorized on the number buttons. Other operations Rotate the VOL control to adjust the volume. Press (ATT) to attenuate the sound. OFF Press (OFF) to turn off the unit. Press (SOUND) to adjust the volume and sound menu. To decrease If you need to mount the rotary commander on the right side of the steering column, you can reverse the controls operative direction. Press (SOUND) two seconds while pushing the VOL control. Tip You can control the operative direction of controls with the unit. Adjusting the sound characteristics You can adjust the bass, treble, balance and fader. Each source can store the bass and treble levels independently. 1 Select the item you want to adjust by pressing (SOUND) repeatedly. VOL (volume) n BAS (bass) n TRE (treble) n BAL (left-right) n FAD (front-rear) 2 Adjust the selected item by rotating the dial. Adjust within three seconds after selecting. (After three seconds, the dial functions as volume control.) Press (LIST) to display the 12 memorized names.