Sony CDX-4480ESP Operating Instructions - Page 15

Maintenance Fuse replacement When replacing the fuse, be sure to use one that matches the amperage described on the fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Dismounting the unit Release key (supplied) µ µ Fuse (10 A) Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. To prevent this, open the front panel by pressing (RELEASE), then detach it and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged. µ Pull the unit out while the release key is inserted. EN µ Press the clip inside the front cover with a thin screwdriver, and lever the front cover free. Additional Information Main unit Back of the front panel 15