Sony CW125 User Manual - Page 17

AUDIO jack (stereo minijack) To listen to sound output from a computer, connect via this jack to the audio output of the computer. d AC IN socket Connects the supplied AC power cord. e OUTPUT MONITOR connector (HD D-sub 15-pin, female) Connect to the video input connector of the monitor. Outputs signals from the selected channel and computer signals only from among the signals from the INPUT A or INPUT B. AUDIO jack (stereo minijack) Connects to external active speakers. The volume of the speakers can be controlled by the VOLUME +/- keys on the Remote Commander. When INPUT A or B is selected, the sound input to the AUDIO connector of INPUT A or B is output. When VIDEO or S VIDEO is selected, the sound input to the AUDIO input connector of VIDEO IN is output. f VIDEO IN (Video input) Connects to external video equipment . S VIDEO jack (mini DIN 4-pin) Connects to the S video output (Y/C video output) of video equipment. VIDEO jack (phono type) Connects to the composite video output of video equipment. AUDIO jack Connect to the audio output of video equipment. g REMOTE RS-232C connector (D-sub 9-pin, female) Connects to a computer to operate the projector from the computer. Remote Commander The supplied remote commander differs according to the model. Refer to the relevant page. VPL-CX125/CX155/CW125: Page 17. VPL-CX100/CX120/CX150: Page 19. VPL-CX125/CX155/CW125 The keys that have the same names as those on the control panel function identically. w; ql qk qj qh qg qf qd wa COMMAND OFF ON INPUT A INPUT D INPUT B INPUT E INPUT C AIR SHOT VIDEO S VIDEO MENU APA ENTER RESET FOCUS ZOOM SHIFT ASPECT KEY STONE D ZOOM MUTING VOLUME + PIC + - AUDIO - FREEZE ID MODE 1 2 3 1 2 3 4 5 6 7 8 9 0 qa qs a ?/1 (On/Standby) key b INPUT A/B/C/D/E keys Selects the input signal output from the connector of the same name as those of the Remote Commander. INPUT D key and INPUT E key are not used in this model. Remote Commander 17 Overview