Sony DAV-DZ170 Operating Instructions - Page 60

Settings for the speakers [SPEAKER SETUP] You can adjust the speaker settings manually without performing the Quick Setup. Select the speakers you will use, set the speaker distance from your listening position, and then adjust the sound level for each speaker. You can adjust the sound level by using the [TEST TONE] function. x [CONNECTION] [FRONT] [YES] [CENTER] [YES]: Normally select this. [NONE]: Select this if no center speaker is used. [SURROUND] [YES]: Normally select this. [NONE]: Select this if no surround speakers are used. [SUBWOOFER] [YES] Note • When you change the [CONNECTION] setting, the [STANDARD] of [SPEAKER FORMATION] setting remains the same, but the other settings of [SPEAKER FORMATION] return to [STANDARD]. x [DISTANCE (FRONT)] Set the distance of the front and center speakers from the listening position. For the best possible surround sound, place all speakers at the same distance from the listening position. The distance can be between 1.0 to 7.0 meters1) (3 to 23 ft) for the front speakers, and 0.0 to 7.0 meters2) (0 to 23 ft) for the center speaker. If you cannot place the center speaker at the same distance, you can move the center speaker up to 1.6 meters closer to the listening position. [L/R] 3.0 m/10 ft: Set the front speaker distance. [CENTER] 3.0 m/10 ft: Set the center speaker distance. 1)0.9 to 6.9 meters for North American models. 2)0.0 to 6.9 meters for North American models. x [DISTANCE (SURROUND)] Set the distance for the surround speakers from the listening position. For the best possible surround sound, place all speakers at the same distance from the listening position. The distance can be between 1.0 to 7.0 meters* (0 to 23 ft). If you cannot place surround speakers at the same distance, you can move the surround speakers up to 5.0 meters (16 ft) closer to the listening position. [L/R] 3.0 m/10 ft: Set the surround speaker distance. * 0.0 to 6.9 meters for North American models. Note • Depending on the input stream, the [DISTANCE] setting may not be effective. x [LEVEL (FRONT)] You can adjust the sound level of the front speakers, center speaker, and subwoofer. You can set the parameters from -6.0 dB to 0 dB for [L/R], and from -6.0 dB to +6.0 dB for [CENTER] and [SUBWOOFER]. Be sure to set [TEST TONE] to [ON] for easy adjustment. [L/R] 0.0 dB: Set the front speaker level. [CENTER] 0.0 dB: Set the center speaker level. [SUBWOOFER] +2.0 dB: Set the subwoofer level. x [LEVEL (SURROUND)] You can adjust the sound level of the surround speakers. You can set the parameter from -6.0 dB to +6.0 dB. Set [TEST TONE] to [ON] for easy adjustment. [L/R] 0.0 dB: Set the surround speaker level. x [TEST TONE] You can adjust the sound level of the speakers by using the [TEST TONE] function. [OFF]: The test tone is not emitted from the speakers. 60US