Home » Sony Manuals » Home Theater Systems » Sony DAV-DZ290K » Manual Viewer

Sony DAV-DZ290K User Manual - Page 52

Color System Video Cd], Progressive Component Out]

Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

x [TV TYPE] You can select the aspect ratio of the connected TV. [16:9]: Select this when you connect a widescreen TV or a TV with a wide mode function. [4:3 LETTER BOX]: Select this when you connect a 4:3 standard TV. The system displays a wide picture with bands on the upper and lower portions of the TV screen. [4:3 PAN SCAN]: Select this when you connect a 4:3 standard TV. The system automatically displays a wide picture on the entire screen and cuts off the portions that do not fit. The system outputs a progressive signal for 5 seconds. Check that the screen is displayed correctly. 3 Press C/c to select [YES], then press . The system outputs a progressive signal. If you select [NO], the system will not output a progressive signal. Note • [PROGRESSIVE (COMPONENT OUT)] is effective only when you connect the unit and TV with a component video cable (page 18). x [4:3 OUTPUT] When you use a 16:9 aspect ratio TV, you can adjust the aspect ratio to watch 4:3 aspect ratio signals. If you can change the aspect ratio on your TV, change the setting on your TV, not the system. [FULL]: Select this when you can change the aspect ratio on your TV. [NORMAL]: Select this when you cannot change the aspect ratio on your TV. A 16:9 aspect ratio signal with black bands on left and right sides of the image appears. Note • Depending on the DVD, [4:3 LETTER BOX] may be selected automatically instead of [4:3 PAN SCAN] or vice versa. x [PROGRESSIVE (COMPONENT OUT)] You can set the progressive signal that is output from the COMPONENT VIDEO OUT jacks to on/off. For details, see "Does your TV accept progressive signals?" (page 27). [OFF]: The system outputs interlace signals. [ON]: The system outputs progressive signals. When you select [ON], follow the Steps below. 1 Select [ON], then press . The confirmation display appears. 2 Press C/c to select [START], then press . 52GB 16:9 aspect ratio TV Note • [4:3 OUTPUT] is effective only when you set [TV TYPE] in [VIDEO SETUP] to [16:9]. x [COLOR SYSTEM (VIDEO CD)] (Asian, Australian, Middle Eastern, and South African models only) You can select the color system when you play a VIDEO CD. [AUTO]: The system outputs the disc's video signal, either PAL or NTSC. If your TV uses a DUAL system, select [AUTO]. [PAL]: The system changes the video signal of an NTSC disc and outputs it in the PAL system. [NTSC]: The system changes the video signal of a PAL disc and outputs it in the NTSC system.

Section	Page
WARNING	2
About These Operating Instructions	3
Playable Discs	5
Example of discs that the system cannot play	6
Note about CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW	6
About Multi Session CD	6
Region code	7
Note about playback operations of a DVD or VIDEO CD	7
Getting Started	8
Unpacking	8
Step 1: Installing the System	10
Positioning the system	10
Assembling the speakers	12
Installing the speakers on a wall	15
Step 2: Connecting the System	17
Connecting the speakers	17
Connecting the TV (Video connection)	18
Connecting the TV (Audio connection)	20
Connecting the other components	21
Connecting the antenna (aerial)	23
Connecting the AC power cord (mains lead)	24
About the demonstration	24
Step 3: Performing the Quick Setup	25
Setting the type of video output to match your TV	26
Step 4: Selecting the Source	28
Step 5: Enjoying Surround Sound	29
Enjoying TV sound with the 5.1 channel surround sound effect	29
Selecting surround sound effects based on your listening preference	29
Disc	32
Playing a Disc	32
Displaying multi-angles and subtitles	33
Changing the sound	34
Checking the audio signal format	34
Selecting a playback area for a Super Audio CD	35
Changing a playback layer for a hybrid Super Audio CD	35
Playing a VIDEO CD with PBC functions (Ver. 2.0)	36
Resuming playback from the point where you stopped the disc	36
Using Play Mode	37
Creating your own program	37
Playing in random order	38
Playing repeatedly	39
Searching/Selecting Disc Contents	40
Using the DVD’s menu	40
Selecting an original title or edited title on a DVD-VR	40
Searching for a title/chapter/ track/scene, etc.	40
Playing MP3 Files/JPEG Image Files	42
Selecting an MP3 file or folder	42
Selecting a JPEG image file or folder	43
Playing a slide show with sound	44
Selecting the slide show duration of JPEG image files	44
Selecting an effect for JPEG image files in the slide show	44
Selecting playback priority of the file type	45
Displaying a list of MP3 files/ JPEG image files	45
Enjoying Video Files	46
About video files	46
Selecting a folder	46
Selecting a video file	47
Displaying a list of video files	47
Adjusting the Delay Between the Picture and Sound	48
Restricting Playback of the Disc	48
Changing the password	49
Changing the System Settings by Using the Setup Display	50
Setting the display or sound track language	51
Settings for the display	51
Settings for HDMI	53
Settings for the audio	54
Other Settings	55
Settings for the speakers	56
Tuner	58
Presetting Radio Stations	58
Listening to the Radio	59
Naming preset stations	59
Viewing the station name or frequency in the front panel display	60
Control for HDMI/External Audio Device	61
Using the Control for HDMI Function for “BRAVIA” Sync	61
Preparing the Control for HDMI function	61
Using the Theatre Mode	62
Watching a DVD by a single button press	62
Turning the system off in sync with the TV	62
Enjoying TV sound from the speakers by this system	62
Setting the Maximum Volume Level of the System	63
Changing the language for the on-screen display of the TV	63
Playing Back Files of a USB Device	63
Connecting the USB device	64
Selecting an audio file or folder	65
Selecting a JPEG image file or folder	66
Selecting a video file or folder	67
Selecting playback priority of the file type	68
Displaying the list of audio files/JPEG image files/video files	69
Playing repeatedly	69
Searching for a file or folder	69
Viewing the information of an audio file in the front panel display	70
Viewing the information of an audio file/video file on the TV screen	70
Checking the date information of a JPEG image file	71
Transferring Songs onto a USB Device	71
Transferring tracks on an audio CD onto a USB device	72
Transferring MP3 files on a DATA CD/DATA DVD onto a USB device	72
Transferring by single button press	73
Folder and file generation rules	74
Erasing audio files on a USB device	74
Using a Sony Ericsson Mobile Phone	75
Using the DIGITAL MEDIA PORT Adapter	75
Playing the connected component on the system	75
Other Operations	77
Getting Optimal Surround Sound for a Room	77
Calibrating the Appropriate Settings Automatically	78
Controlling the TV with the Supplied Remote	79
Enjoying Karaoke	80
Setting the system to karaoke mode	80
Adjusting the microphone	80
Dolby Digital Karaoke format	81
Changing the key of a song (Key Control)	81
Playing karaoke with any stereo disc (Karaoke Pon)	82
Selecting the vocals (Vocal Select)	82
Using the Sound Effect	83
Reinforcing bass frequencies	83
Enjoying the sound at low volume	83
Enhancing compressed sound	83
Selecting the Effect to Suit the Source	84
Changing the Input Level of the Sound from Connected Components	85
Using the Sleep Timer	85
Changing the Brightness of the Front Panel Display	86
Viewing Information About the Disc	86
Viewing the playing time and remaining time in the front panel display	86
Viewing the playing time and remaining time on the TV screen	87
Checking the play information of the disc	87
Checking the date information of a JPEG image file	88
Returning to the Default Settings	89
Returning the system parameters, such as preset stations, to the default settings	89
Returning the [SETUP] settings to the default	89
Additional Information	90
Precautions	90
Notes about the Discs	91
Troubleshooting	92
Self-diagnosis Function	101
Specifications	102
Glossary	103
Playback priority of file types	106
Language Code List	107
Parental Control Area Code List	107
Index to Parts and Control	108
Front panel	108
Rear panel	109
Front panel display	110
Remote control	111
Guide to the Control Menu Display	112
Control Menu display	112

Match case Limit results 1 per page

[TV TYPE]

You can select the aspect ratio of the connected

TV.

[16:9]

: Select this when you connect a wide-

screen TV or a TV with a wide mode function.

[4:3 LETTER BOX]: Select this when you

connect a 4:3 standard TV. The system displays

a wide picture with bands on the upper and

lower portions of the TV screen.

[4:3 PAN SCAN]: Select this when you connect

a 4:3 standard TV. The system automatically

displays a wide picture on the entire screen and

cuts off the portions that do not fit.

Note

• Depending on the DVD, [4:3 LETTER BOX] may be

selected automatically instead of [4:3 PAN SCAN] or

vice versa.

[PROGRESSIVE (COMPONENT OUT)]

You can set the progressive signal that is output

from the COMPONENT VIDEO OUT jacks to

on/off. For details, see “Does your TV accept

progressive signals?” (page 27).

[OFF]

: The system outputs interlace signals.

[ON]: The system outputs progressive signals.

When you select [ON], follow the Steps below.

Select [ON], then press

The confirmation display appears.

Press

to select [START], then

press

The system outputs a progressive signal for

5 seconds. Check that the screen is

displayed correctly.

Press

to select [YES], then press

The system outputs a progressive signal. If

you select [NO], the system will not output

a progressive signal.

Note

• [PROGRESSIVE (COMPONENT OUT)] is

effective only when you connect the unit and TV with

a component video cable (page 18).

[4:3 OUTPUT]

When you use a 16:9 aspect ratio TV, you can

adjust the aspect ratio to watch 4:3 aspect ratio

signals. If you can change the aspect ratio on

your TV, change the setting on your TV, not the

system.

[FULL]

: Select this when you can change the

aspect ratio on your TV.

[NORMAL]: Select this when you cannot

change the aspect ratio on your TV. A 16:9

aspect ratio signal with black bands on left and

right sides of the image appears.

Note

• [4:3 OUTPUT] is effective only when you set [TV

TYPE] in [VIDEO SETUP] to [16:9].

[COLOR SYSTEM (VIDEO CD)]

(Asian, Australian, Middle Eastern, and

South African models only)

You can select the color system when you play a

VIDEO CD.

[AUTO]

: The system outputs the disc’s video

signal, either PAL or NTSC. If your TV uses a

DUAL system, select [AUTO].

[PAL]: The system changes the video signal of

an NTSC disc and outputs it in the PAL system.

[NTSC]: The system changes the video signal of

a PAL disc and outputs it in the NTSC system.

16:9 aspect ratio TV