Sony DAV-DZ290K User Manual - Page 54
Settings for the audio, AUDIO SETUP]
View all Sony DAV-DZ290K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
(page 62) is activated and loud sound may be output depending on the volume level of the system. You can prevent this by limiting the maximum level of the volume. [LEVEL3]: Maximum volume level is set to 10. [LEVEL2]: Maximum volume level is set to 15. [LEVEL1]: Maximum volume level is set to 20. [OFF]: Off. Note • This function is available only when [CONTROL FOR HDMI] is set to [ON]. x [YCBCR/RGB (HDMI)] You can select the type of HDMI signal output from the HDMI OUT jack. [YCBCR]: The system outputs YCBCR signals. [RGB]: The system outputs RGB signals. Note • If the playback picture becomes distorted, set [YCBCR] to [RGB]. • If the HDMI OUT jack is connected to a component with a DVI jack, [RGB] signals will be automatically output even when you select [YCBCR]. x [AUDIO (HDMI)] You can select the audio output status from the HDMI OUT jack. [OFF]: The system does not output sound from the HDMI OUT jack. [ON]: The system outputs audio signals by converting Dolby Digital, DTS, or 96 kHz/24bit PCM signals to 48 kHz/16-bit PCM. Note • When you connect the unit and TV with an HDMI cable and [ON] is selected, [AUDIO DRC], [A/V SYNC], DYNAMIC BASS, "DEC. MODE," and sound mode are not applied to the sound that is output from the TV. • When you set the function to other than "DVD" or "USB," the system does not output the sound from the HDMI OUT jack even if you set [AUDIO (HDMI)] to [ON]. x [JPEG RESOLUTION] You can select the resolution of JPEG image files output from the HDMI OUT jack. [SD ]: The system outputs standard resolution with a black frame. [HD ]: The system outputs HD resolution with a black frame. [HD]: The system outputs the HD resolution without a black frame. [(1920 × 1080i) HD ]: The system outputs full size HD resolution with a black frame. [(1920 × 1080i) HD]: The system outputs full size HD resolution without a black frame. Note • [JPEG RESOLUTION] is effective only when you set [TV TYPE] in [VIDEO SETUP] to [16:9], and you set [HDMI RESOLUTION] in [HDMI SETUP] to other than [720 × 480p] or [720 × 480/576p]. • You can select [(1920 × 1080i) HD ] or [(1920 × 1080i) HD] only when you set [HDMI RESOLUTION] in [HDMI SETUP] to [1920 × 1080i]. • The HDMI signal will stop momentarily when: - the system is loading or unloading a DATA CD or DATA DVD. - you connect or remove a USB device. Settings for the audio [AUDIO SETUP] AUDIO SETUP SPEAKER FORMATION: AUTO CALIBRATION: AUDIO DRC: OFF TRACK SELECTION: OFF x [SPEAKER FORMATION] You can select the position of the speakers for better surround sound. For details, see "Getting Optimal Surround Sound for a Room" (page 77). x [AUTO CALIBRATION] You can calibrate the appropriate settings automatically. For details, see "Calibrating the Appropriate Settings Automatically" (page 78). 54GB